Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> windscreen washer bottle
        
(Message started by: David_South_West on Jun 19^th, 2005, 7:54am)

Title: windscreen washer bottle
Post by David_South_West on Jun 19^th, 2005, 7:54am

windscreen washer bottle has developed a leak where the fluid level sensor fits in.How can I remove the sensor..it turns but doesn't tighten.

Thanks

Title: Re: windscreen washer bottle
Post by Mottsy on Jun 19^th, 2005, 12:15pm

Hi,

I had this exact problem.

The sensor just pulls out. (Careful use of a flat bladed scredriver my help to pop it out.) It is the rubber seal that holds it in place.

On mine the actual sensor itself had a crack and needed to be replaced. The bottle was fine. To refit just push it back in.

Hope this helps,

Tony

Title: Re: windscreen washer bottle
Post by David_South_West on Jun 19^th, 2005, 12:32pm

Thanks mottsy
Got it out.The same problem the sensor was cracked .
Thanks for help