Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Heater Blower Motor broken -- or not?
        
(Message started by: madkiss on Jun 21^st, 2005, 7:02pm)

Title: Heater Blower Motor broken -- or not?
Post by madkiss on Jun 21^st, 2005, 7:02pm

Hi folks,

over the last days, I found out so many facts that now I am not even sure myself anymore what's going wrong.

I can see the following symptoms: My AC is working (cold air is floating into the car when driving fast), but when switching the Heater Blower motor from "off" to 1, 2 or 3, exactly nothing happens. No speed of, no more fresh air ... bah. What could be possible causes for this?

I was told there is some "plug" somehwere that might have trouble and thus keep the motor from starting -- what plug could that be apart from the standard resistors?

Title: Re: Heater Blower Motor broken -- or not?
Post by ren on Jun 21^st, 2005, 11:15pm

Hi
You may have already checked this ?
the dial pushes on to a spindle which turns
the motor to 1 2 3 is the part of the dial which
fits on the spindle ok,is it turning the spindle
if its split or damaged its probably not gripping
tight enough.
its only a thought after reading your post saying
the motor makes a noise at times.

Ren