Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Help with engine to gearbox bolts
        
(Message started by: DJWerkz on Jul 12^th, 2005, 4:23pm)

Title: Help with engine to gearbox bolts
Post by DJWerkz on Jul 12^th, 2005, 4:23pm

Seems that the previous garage who worked on my car has lost some parts!

Can someone please provide details of which bolts to use to attach the BOB engine to auto gearbox? Also need bolts that fix torque converter to gearbox too?

Thanks Gang!

Title: Re: Help with engine to gearbox bolts
Post by martin_rowe on Jul 12^th, 2005, 4:51pm

I may have a set of tc bolts in a convertersomewhere as for bell hsg bolts, main agent for the correct ones, unless some one is breaking at the moment, they are all m10 size of different lengths, but the heads are all 13mm, engineering cap screws/bolts of the right length would be a good subsitute, dont forget the 3 for the starter either.

Title: Re: Help with engine to gearbox bolts
Post by DJWerkz on Jul 12^th, 2005, 4:59pm

;)...thanks Martin, don't mind getting new bolts from main dealer, anyone provide FINIS numbers?

Title: Help with Torque Converter bolts
Post by DJWerkz on Jul 13^th, 2005, 3:42pm

OK, ordered the bolts for the bell housing to engine from Ford main dealer but they are uncertain which bolts I am refering to with regard to the torque converter!

In the Ford workshop manual in section 'A4LDE Automatic Transmission' on page 7 (of 19), drawing S1701022 is applicable to instruction 24 which reads: "Release the torque converter. Remove the four bolts".
These are the bolts I require, so can anyone help with identifying these with either FINIS or engineering numbers?
These bolts are accessed after removing the starter motor.
Thanks.

Title: Re: Help with engine to gearbox bolts
Post by Snoopy on Jul 13^th, 2005, 5:01pm

Try this number with ford E 800152 S72 listed as they are lsited as M10x30mm if that helps

I think they are the ones refered to in your text!

If you have a look here http://www.fordscorpio.co.uk/a4lde.htm and tell me which diagram and number you are refering to then I can give you a definitive answer rather that 'guess'

Title: Re: Help with engine to gearbox bolts
Post by DJWerkz on Jul 13^th, 2005, 5:47pm

Thanks Snoops, problem is, the links you referred me to are copies of those that appear on the Ford Microcat system and these do not clearly show the required bolts. Even my local Ford dealer had some choice words to say on how inadequate the diagram is in identifying the bolts.
The second drawing in your link shows two bolts that MIGHT be the correct ones, one is numbered 35 but even my Ford dealer would not state his reputation on them being the right ones!

Title: Re: Help with engine to gearbox bolts
Post by DJWerkz on Jul 14^th, 2005, 4:30pm

OK get this down boys!

The correct Ford part number for the 4 bolts that lock the torque converter is:

7103918

Any part numbers previosuly supplied by other members are not valid.

Title: Re: Help with engine to gearbox bolts
Post by Snoopy on Jul 14^th, 2005, 10:04pm

Well we wern't looking in the right place really were we. When you look in the right place they are easy to find. BUT a big thanks something else learnt!