Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> help no go
        
(Message started by: ricky on Jul 28^th, 2005, 4:01pm)

Title: help no go
Post by ricky on Jul 28^th, 2005, 4:01pm

is there anybody out there in essex who could do a scan on my 2.9, 12v that wont start, no spark. ive changed the ignition control module and it ran fine for 1 day then has just cut out again , ive tried a new module but no good ,im up the creek with no scorpio im in witham essex and ive only just got the car and im desperate to get it going as ive got to take my daughter back and forth to hospital , thanks :(

Title: Re: help no go
Post by Snoopy on Jul 28^th, 2005, 6:58pm

Have you checked the coil and the leads that go to and from it?

if you have replaced the ignition module in the dizzy then there's not much else.

Title: Re: help no go
Post by Paul_Boulden on Jul 30^th, 2005, 12:31pm

Hi Ricky,
I had a similar non-start problem with my 1996 12v. I replaced the ignition module which caused a temporary solution but it didn`t last so I replaced the coil which has sorted the problem.
I was getting weak sparks sometimes or no spark at all.

Paul Boulden