|
||
Title: auto wont change past 2nd Post by gavin_low on Aug 3rd, 2005, 8:16am hi all new guy hear to autos as well the prob i have is the car was fine stopped put some fuel in got back in and off i set only to find that in drive only had 1st gear ::) changed down to 3rd still only 1st gear changed down to 2nd and the car changed up to 2nd gear but will not go to 3rd of 4th where ever you put it. have check oil in box its just over max when you do the thought the gears 3 times then check after a min also the car drives fine not slipping thanks for any help |
||
Title: Re: auto wont change past 2nd Post by Snoopy on Aug 3rd, 2005, 4:00pm clean the maf is the first thing to do. http://www.fordscorpio.co.uk/cleanmaf.htm |
||
Title: Re: auto wont change past 2nd Post by gavin_low on Aug 3rd, 2005, 4:36pm this does not help me i think as mine is only the 2.9 12v with the 2 air flow meters please tell me if i am wrong cheers gavin |
||
Title: Re: auto wont change past 2nd Post by Highlander on Aug 4th, 2005, 2:28am Im assuming since you can get it started you can select Park/reverse/Neutral ok and its not a problem with the selector switching? Could it be in Limited Operation Strategy? |
||
Title: Re: auto wont change past 2nd Post by gavin_low on Aug 4th, 2005, 7:55am hi again the only thing i have check is the gear box oil so any info will be great where is this sel switch will start with that cheers gavin |
||
Title: Re: auto wont change past 2nd Post by Snoopy on Aug 4th, 2005, 8:10am OK Now I understand with it being the 12v..... By the ICV there ( under it actually) there is a small black Vacum Pipe which may have become detached. If so that can cause the problems you describe. But it worth checking all the vacum pipes for leaks etc as they are all interconnected.. Post back when you have checked. |
||
Title: Re: auto wont change past 2nd Post by gavin_low on Aug 4th, 2005, 5:06pm hi snoopy well have checked all the pipe work all seems to be ok but wot is a icv and where is it cheers for the help so far |
||
Title: Re: auto wont change past 2nd Post by Snoopy on Aug 4th, 2005, 7:41pm the ICV is the silver canister looking thing near the air intakes with the throttle linkage to it . has a plug on the side of it .... see par 18 on thsi document it describes it as the ISC valve http://www.fordscorpio.co.uk/manual/engines/12v/V612VRem&Instal.pdf |
||
Title: Re: auto wont change past 2nd Post by gavin_low on Aug 4th, 2005, 8:11pm hi snoopy well found it check the two pipes both on but when under the car i found one that runs from one side of the box right up into the engine bay and back down the other side looks like a breather to me but it just stops near the box on the other side cant see where it may go any more thoughts cheers gavin |
||
Title: Re: auto wont change past 2nd Post by gavin_low on Aug 7th, 2005, 1:12pm hi all well the good news is a have all 4 gears back now the prob was a small black box at the front of the engine just below the icv and to the right took if off cleaned it up and wot do you know 4 gears back thanks to all for info and helping me out |
||
Title: Re: auto wont change past 2nd Post by Adam_2000 on Aug 28th, 2005, 8:44pm Hi all :) Quote:
What is this "small black box" ?... is'nt MAF ? |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |