|
||
Title: Crankshaft Pulley wobble Post by barrie on Sep 13th, 2005, 2:19pm Hi all, can anyone please advise me as what is involved in changing the Crankshaft Pulley on a 24v 1995 Scorpio will the rad and fans have to come off or any special tools needed as i have a wobble on the pulley is it anything to worry about or does it need sorting right away Thanks in advance |
||
Title: Re: Crankshaft Pulley wobble Post by howiedintheplace on Sep 13th, 2005, 7:43pm Barrie Take a look at this: http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=Problems;action=display;num=1101489496;start=0#0 He found a draper pulley that fitted. Not sure what you would have to remove as I have only took the pulley off when the engine is out of the car. ;) Basically you need space to get the puller on to the pulley, so may be the rad will have to come off? Yes I would change A.S.A.P as it may be your bolt is loose as well & if it comes off it would cause alot of damage :o Goodluck. |
||
Title: Re: Crankshaft Pulley wobble Post by barrie on Sep 16th, 2005, 7:23am Thanks for the reply Dave. I will get it done next week as i think that it will be a garage job as i dont have a puller to take it off with. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |