Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> H02S11 & Ho2S22 sensors for 24V
        
(Message started by: david_molloy on Feb 2nd, 2006, 11:36pm)
Title: H02S11 & Ho2S22 sensors for 24V
Post by david_molloy on Feb 2nd, 2006, 11:36pm
Hello All.

Looks like "sensor time" from DTC's.
Have looked at site but cannot seem to find out if above are 3 or 4 wire type.
Would like to order some before lifting car up as that is a major task in itself at present so been lazy and asking fellow members to avoid preliminary lift!!
Any sites recommended for sensors.
Finally do you have to solder wires on??
Thanks
david
Title: Re: H02S11 & Ho2S22 sensors for 24V
Post by martin_rowe on Feb 3rd, 2006, 8:41am
All 4 wire
Title: Re: H02S11 & Ho2S22 sensors for 24V
Post by Wafoo on Feb 3rd, 2006, 8:50am
Don't have to solder them,there's a disconnect multiplug attached


Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.