Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Prop Shaft out of Balance
        
(Message started by: leftofcentre on Feb 13^th, 2006, 6:34pm)

Title: Prop Shaft out of Balance
Post by leftofcentre on Feb 13^th, 2006, 6:34pm

Anyone kniow how to rectify this one?

Have replaced the centre bearing but the indicated vibration is still there.

Someone mentioned about a Hoseclip mod before? How would one know which way to put it?

Assume prev owner(s) had the shaft removed and didnt replace correctly as i matched all bolts to correct holes after i had performed centre bearing replacement.

Title: Re: Prop Shaft out of Balance
Post by ricky on Feb 13^th, 2006, 7:13pm

the trick with a clip works but its trial and error, more error, the only real way is to take your prop into a enginnering shop and have it ballanced. you could try turning it bolt by bolt hole to se if it helps but very time consuming ricky