Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Bulb In Clock
        
(Message started by: pede on Apr 3^rd, 2006, 7:40pm)

Title: Bulb In Clock
Post by pede on Apr 3^rd, 2006, 7:40pm

Hi Everyone,
Is there an easy way of changing the bulb in the clock of my Ultima. >:(
Or does the whole dashboard have to come off.
Thanks, Pede. >:(

Title: Re: Bulb In Clock
Post by nuttyscorp on Apr 3^rd, 2006, 7:50pm

just unscrew the walnut fascia, and pop it off the retaining clips, you should be able to change bulb from there or push clock out from inside the walnut.

hth

Russ

Title: Re: Bulb In Clock
Post by mr._floppy on Apr 3^rd, 2006, 7:54pm

It is possible to do a partial dash removal.

Just unscrew the top 4 holding screws and carefully prise away the fake wood fascia enough to get your hand in and unplug and remove the clock unit and replace the bulb.
If, however, you are going to be a long term Scorpio owner you'd be as well learning how to do the full removal properly.

There's a helpful page on the site.

Title: Re: Bulb In Clock
Post by pede on Apr 3^rd, 2006, 8:02pm

Thanks Guys.[b][/b] ;D

Title: Re: Bulb In Clock
Post by Kjetil S on Apr 3^rd, 2006, 11:28pm

Top four ???

According to the manual there's six screws, two above the instrument panel, two below, and two above the stereo mounting.