Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Problems >> Auldible Alert On Lock & Unlock
(Message started by: Art on Apr 6th, 2006, 9:37pm)

Title: Auldible Alert On Lock & Unlock
Post by Art on Apr 6th, 2006, 9:37pm
Hi All
Have any of you assembled, or purchased ready assembled & tested, the Subject Project?. If you have I would appreciate any help you can give me especially as to where I can get the PCB and a circuit diagram. I notice all the other components are listed. An appreciation of the working of the unit in situ would also be welcome.
Thanks
Art

Title: Re: Auldible Alert On Lock & Unlock
Post by Baz on Apr 6th, 2006, 10:38pm
I fitted the one made by Steve Collister a few years ago and it is still working fine. It flashes the indicators as well. I must admit that I did take off the audiable bit cos it was a little loud at 3 am!!

Baz

Title: Re: Auldible Alert On Lock & Unlock
Post by Paul B on Apr 7th, 2006, 5:51am
Got the same mod as Baz, and agree that the bleeper is a bit annoying.
But I mounted mine inside the car (behind the dash) and its much more muted. Sounds almost classy  ::)

Title: Re: Auldible Alert On Lock & Unlock
Post by Paulus on Apr 7th, 2006, 6:23am
I would also be interesting in getting hold of the circuit diagram.

Come one every...share...be a good boy.  ;D

Title: Re: Auldible Alert On Lock & Unlock
Post by scorpio_man on Apr 7th, 2006, 6:45am
hi there

steve's stopped making them and has sold his scorpio  :'(

sorry :(

Title: Re: Auldible Alert On Lock & Unlock
Post by Daven on Apr 7th, 2006, 11:29am
JamesA did a flash-on Lock mod here (http://www.fordscorpio.co.uk/flashermod.htm)

Not seen him about for a long time so not sure if they are still available, but the schematic is shown!

I did buy one (because I have not got global opening) but blew it up fitting a sounder, I was thinking of trying again at some point!

HTH

Dave

Title: Re: Auldible Alert On Lock & Unlock
Post by Art on Apr 7th, 2006, 4:33pm

on 04/07/06 at 06:45:45, scorpio_man wrote:
hi there

steve's stopped making them and has sold his scorpio  :'(

sorry :(


Hi scorpio_man

Thanks for reply.

Are you still in touch with Steve? If so, would it be possible to ask him if he could release details of: PCB, wireing diagram,  PCB Layout & circuit diagram. Maybe I after a look could make a few.
Cheers Art.

Ps Thanks to all others for their comments. Appreciated.  



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.