Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Problems >> inlet manifold
(Message started by: von on May 2nd, 2006, 6:05pm)

Title: inlet manifold
Post by von on May 2nd, 2006, 6:05pm
Hi i have a 2.3 ultima, on lpg i have just had to change  the inlet manifold as it was cracked, now on starting up the engine idles irractically, has anyone got any ideas as what could be wrong?  :'(

Title: Re: inlet manifold
Post by sector-9 on May 2nd, 2006, 7:49pm
Probably an air leak in or around the manifold, but it could just be the ECU re-learning the best idle settings if you've disconnected the battery...

Darren

Title: Re: inlet manifold
Post by von on May 4th, 2006, 6:33pm
Thanks Darren, we found a hose that had not been connected, now it runs sweet again.

Von



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.