|
||
Title: oil coolers Post by john_smiffy on May 7th, 2006, 2:17pm is a gear box oil cooler fitted as standard on ultima 2.9 12v auto and if so were is it fitted in the bottom off the rad or as an extra |
||
Title: Re: oil coolers Post by Snoopy on May 7th, 2006, 5:31pm YES there is a oil box cooler fitted to the 12v Auto , its just below and infront of the AC heaty exchanger ( looks like a rad) you can see it hanging in this write up http://www.fordscorpio.co.uk/images/radchange06.jpg and the write up is HERE (http://www.fordscorpio.co.uk/radiator.htm) |
||
Title: Re: oil coolers Post by john_smiffy on May 7th, 2006, 5:56pm cheers dave i thought it might have had one my old MK1 granny had one built in the rad i was going to wait to i went to work tommorow and use the hoist in my yard to go under it i still will as i have only had it a few days |
||
Title: Re: oil coolers Post by Snoopy on May 8th, 2006, 7:29am The Scorpio also uses the front radiator to cool the oil as well as having the front oil cooler. The oil cooler pipes are one thing to watch out for they are very exposed and can let go at any time. The oil cooler pipes and diagrams can be seen on this page PIPES (http://www.fordscorpio.co.uk/leaks.htm) |
||
Title: Re: oil coolers Post by sector-9 on May 8th, 2006, 11:21pm Incidentally the diesel has the same cooler (despite being a manual!), but it is used for cooling engine oil rather than gearbox oil... Darren |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |