Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Replacing inlet manifold on 2.3 Ultima R reg
        
(Message started by: fordscorp on May 10^th, 2006, 9:43am)

Title: Replacing inlet manifold on 2.3 Ultima R reg
Post by fordscorp on May 10^th, 2006, 9:43am

Hi everyone
Not being a mechanic, I would appreciate advice on removing and replacing the inlet manifold on my Scorpio Ultima 2.3 R reg. I managed to buy one on Ebay thanks to advice off a kind member on here and if its not too difficult I would like to do it myself. Incidently if anyone is interested the guy I'm buying off is breaking a Scorpio Ultima R reg and parts are very reasonable. Anyone interested please let me know as I have his telephone number and would inquire for you. (My way of showing appreciation to members helping me)

Title: Re: Replacing inlet manifold on 2.3 Ultima R reg
Post by fordcos on May 10^th, 2006, 9:51am

hi what model is the guy breaking

Title: Re: Replacing inlet manifold on 2.3 Ultima R reg
Post by fordscorp on May 10^th, 2006, 9:59am

Hi friend
The model he is breaking is R reg Scorpio Ultima Estate
any further info please email me as I'm not always on this site
mike@freesixties.com

Title: Re: Replacing inlet manifold on 2.3 Ultima R reg
Post by fordcos on May 10^th, 2006, 10:02am

hi what engine has it got

Title: Re: Replacing inlet manifold on 2.3 Ultima R reg
Post by Kjetil S on May 10^th, 2006, 12:41pm

It says 2.3 in the topic ;)

Title: Re: Replacing inlet manifold on 2.3 Ultima R reg
Post by fordcos on May 10^th, 2006, 1:15pm

not on the car that is being broken it doesn't

Title: Re: Replacing inlet manifold on 2.3 Ultima R reg
Post by fordscorp on May 10^th, 2006, 1:36pm

Hi friend
The engine is a 2.3
regards
Mike

Title: Re: Replacing inlet manifold on 2.3 Ultima R reg
Post by fordcos on May 10^th, 2006, 1:43pm

thanks mike but not what im looking for

Title: Re: Replacing inlet manifold on 2.3 Ultima R reg
Post by Kjetil S on May 10^th, 2006, 1:49pm

Ah, I misunderstood. My bad.

Title: Re: Replacing inlet manifold on 2.3 Ultima R reg
Post by fordscorp on May 10^th, 2006, 1:51pm

Hi fordcos
No prob, but lookin at your name fairly easy to assume you have a cosworth. I've seen plenty advertised down this end (West Midlands) so if you want I'll make inquiries an if successfull email you phone nos etc

Title: Re: Replacing inlet manifold on 2.3 Ultima R reg
Post by fordcos on May 10^th, 2006, 2:11pm

thanks mike what im after is the engine wiring loom