|
||
Title: Replacing Lock Set Post by Kenboy on May 14th, 2006, 11:43am Hi I just aquired a lock set for my car and need to ask the following questions, what is the procedure for replacement and once the ignition barrel has been replaced how do I go about having the car programed to accomodate this change. Regards Kenboy |
||
Title: Re: Replacing Lock Set Post by Dave on May 14th, 2006, 3:42pm Hi, this link will be essential when replacing the locks: http://www.fordscorpio.co.uk/doorlockrep.htm What many folks do is drive the car to the Ford dealer then change the barrel when you are there. They can then program the red key to the car. Hope this helps :) |
||
Title: Re: Replacing Lock Set Post by Kjetil S on May 14th, 2006, 3:51pm Or you can tape the old key to the steering column after you change the barrel, so you can get to the FMD ;) |
||
Title: Re: Replacing Lock Set Post by Kenboy on May 14th, 2006, 5:03pm Many thanks for your replys, most helpful. regards Kenboy |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |