Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> 16 v gearbox
        
(Message started by: biggun on Jul 4^th, 2006, 11:18pm)

Title: 16 v gearbox
Post by biggun on Jul 4^th, 2006, 11:18pm

my gearbox has got a tight/stiff change when under load,ok changing down and no noises from the box, any one any ideas? ???or does anyone know if the twin cam sierra box will fit the 16v block, if not does any one have a gearbox for sale ???scrap yards near me want a fortune for them and none on ebay near bye,london is the closest one but he wont post it,and to make it worse its only £45 :P

Title: Re: 16 v gearbox
Post by sector-9 on Jul 4^th, 2006, 11:25pm

If you're talking manual gearboxes then the MT-75 was used on the later 2.0 DOHC engines in the Sierra and Granada - however the clutch release bearing was cable operated rather than hydraulic...

Darren

Title: Re: 16 v gearbox
Post by jonnycab on Jul 4^th, 2006, 11:33pm

I think that the bell housing on the MT-75 is different if it has a hydraulic clutch :)