Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Problems >> Failed MOT
(Message started by: tipierre on Jul 19th, 2006, 12:53pm)

Title: Failed MOT
Post by tipierre on Jul 19th, 2006, 12:53pm
My lovely car failed MOT for CO emission...I then ask the garage to repart it but they told me that compresssion is too low in 2 cylinders (140)...Is it really the cause of the emission problem ?
They don't want to repair it and my MOT expire next week !

Title: Re: Failed MOT
Post by mr._floppy on Jul 19th, 2006, 4:19pm
  A garage turning down  work ?

   What's the world  coming  to  ::)


    More  likely  the garage  is   unsure  as  to  the   reason   for  the  high  emissions

    (   there   could  be  dozens   of  reasons  )  and   their   diagnosis   could  well

    be  wrong.

                               What  are  the  fail   emission  figures  ?  

   

Title: Re: Failed MOT
Post by sector-9 on Jul 19th, 2006, 7:27pm
If they're right about the low compression then it's probably a failed head gasket if the two cylinders are next to each other.  Could cause bad emissions but so can lots of other things so it might be worth getting another compression check done to confirm...

Darren

Title: Re: Failed MOT
Post by tipierre on Jul 20th, 2006, 10:30am
They told me it is the head gasket...I don't really know what to do, I don't want to pay to much for a car I bought less than 1000.

Title: Re: Failed MOT
Post by sector-9 on Jul 20th, 2006, 9:40pm
Well assuming it doesn't need anything else you could be looking at £250+ to have the gasket done.  Or you could do it yourself if time isn't an issue and you already have a good socket set and torque wrench...

Darren



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.