Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Problems >> Seat/mirrors position storage switch
(Message started by: John_Carmon on Feb 2nd, 2007, 3:49pm)

Title: Seat/mirrors position storage switch
Post by John_Carmon on Feb 2nd, 2007, 3:49pm
i`am unable to store any new adjustments, there are 3 positions already stored but their for midgets, i`am unable too obtain a chime from the long memory button, therefore i`am unable too store any new positions.  Have fitted a new switch from Ford, made no difference.  Have tried "search"on the web site, but nothing comes up. I wondered if there was any quriks besides the instructions in the owners handbook, i would welcome any help & advise.

Title: Re: Seat/mirrors position storage switch
Post by Mummra on Feb 2nd, 2007, 5:01pm
Hi just done this recently, to store the position settings you have to press the long button followed by the memory number you wish to store it in. you won't get the chime until you have pressed the number button and not after pressing the long button. Also if you press the unlock button on the remote immediately storing the setting you will get another chime and that will store the remote to that memory position and means reset itself to that position whenever you unlock the car with the remote.

Hope that makes sense.
Dave

Title: Re: Seat/mirrors position storage switch
Post by John_Carmon on Feb 2nd, 2007, 6:11pm
Hi Dave, i know about the long button first etc, i will try your other advice tomorrow, sounds promising many thanks, will let you know tomorrow.



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.