|
||
|
Title: Part number help please Post by Tim_Lusername on Apr 23rd, 2007, 1:21pm Hi As some of you probably know I’m a real noob when it comes to this car repair malarkey so I’m hoping you can help me with advice on getting parts. As my local Ford dealer is a right pain to get to I’m hoping I can get these parts on line. I was banking on using these guys http://www.fordpartsuk.com/ But if anyone knows somewhere nearer Bristol that would be good. Can someone tell me where I can find part numbers, or tell me what they are for the following bits of kit for a 1995 2.9 24v Cosworth? Battery cover (surprise!) oh and the nut’s gone as well any idea on size to save me guessing although I assume it’s something metric and sensible not a daft size. Top Rad (hose 2) and part of the oil/coolant heat exchanger (hose 3) I just need the length between the engine and the T-piece connector Hose numbers here - http://www.fordscorpio.co.uk/leaks.htm Thanks for any help Tim |
||
|
Title: Re: Part number help please Post by scorpio_man on Apr 23rd, 2007, 1:43pm hi there Top Rad (hose 2) and part of the oil/coolant heat exchanger (hose 3) I just need the length between the engine and the T-piece connector Hose numbers here - http://www.fordscorpio.co.uk/leaks.htm are you wanting hose 2, hose 3 AND another hose? which number? hth |
||
|
Title: Re: Part number help please Post by scorpio_man on Apr 23rd, 2007, 1:52pm oh, pm your vin number so i can check the part numbers. hth |
||
|
Title: Re: Part number help please Post by Tim_Lusername on Apr 23rd, 2007, 2:20pm Hi Scorpio man thanks for the reply I need hose 2 and hose 3 Have just checked and it looks as though someones spliced a new end on hose 3 at some point which managed to confuse me totally - it doesn't take much :-( Pic here http://www.timdenning.myby.co.uk/Car/scorpio-leak-6.jpeg Will dig out the VIN now Thanks for your help Tim |
||
|
Title: Re: Part number help please Post by scorpio_man on Apr 23rd, 2007, 2:57pm hi there hose 2 is finis 7201469 hose 3 is (new) finis 1021014 (old) finis 7259325 hth |
||
|
Title: Re: Part number help please Post by Tim_Lusername on Apr 23rd, 2007, 3:02pm Hi BTW looking at the car again it looks like hose 3 disappears waaaaay down into the engine bay - does anyone know if I'll have to get the car up in the air to get the undertray off. That would be beyond me I'm afraid I don't have the kit so another bodge could be on the horizon :-( Cheers Tim |
||
|
Title: Re: Part number help please Post by Tim_Lusername on Apr 23rd, 2007, 3:06pm Thanks for that Scorpio man Can you explain the old & new numbers to an idiot please? |
||
|
Title: Re: Part number help please Post by scorpio_man on Apr 23rd, 2007, 3:11pm hi there it seems to have changed in mid '97. maybe a new supplier? not sure, but most of the time, the part is the same. hth |
||
|
Title: Re: Part number help please Post by Tim_Lusername on Apr 23rd, 2007, 3:14pm OK thank you for your help Tim |
||
|
Title: Re: Part number help please Post by tintin on Apr 23rd, 2007, 4:52pm Tim, I have a 95 cossie scrapper near Telford, not too far away, it has a battery cover, and all the hoses. Not new, but should be fine (car was running fine before hgf, ford put in a new rad, so would have replaced hoses given half a chance!). Yours for token beers if you want to head up. Good opportunity to see how they should look as well, i suppose. Cheers |
||
|
Title: Re: Part number help please Post by Tim_Lusername on May 7th, 2007, 8:51pm Hi tintin Sorry for the delay in responding - I wasn't ignoring you! Thanks for the offer - trouble is I'd need a lift from a mate or a train to get up there - If I dangled more beer in front of you would you mind posting them once you get the dosh? Looking at this the postage is going to be way cheaper than the train :-) http://www.royalmail.com/portal/rm/content1?mediaId=22700554&catId=400026 That's assuming it's under 2Kg!!! If your up for it then you can email me your address and desired number of beverages + postage from my website http://www.timdenning.myby.co.uk/ Just so the spam bots dont grab it TIA Tim |
||
|
Title: Re: Part number help please Post by tintin on May 7th, 2007, 10:42pm darn it, you are 12 hours too late, was down there, just come back up..... i take it the car is not driving :-/ not sure how well the battery tray will hold up in the post ??? |
||
|
Title: Re: Part number help please Post by mr._floppy on May 8th, 2007, 12:47am The undertray is secured by four small torx headed screws ( 2 per side ). No need to lift the car, access to the screws is easier if the steering is on full lock. |
||
|
Title: Re: Part number help please Post by Tim_Lusername on May 8th, 2007, 2:33pm Ha, am I lucky or what :-((( I take it it's going to be a while till you get there again? Mr Floppy thanks for the info on the undertray Tim |
||
|
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |