|
||
Title: Electric Seat Problems (Manual Override) Post by macw on Oct 5th, 2007, 6:08pm Hi again, The electric drivers seat of my 98 2.3 Ultima 170k is refusing to tilt the back up. I read on the problems page that the module has to be replaced I just wondered if anyone knew why. I was a little concerned to put in a new module and it blows trying to drive a faulty motor? Also I am told there is a manual override with a screwdriver to move the back of the seat up until I can get a new module. I've removed the side cover but I cannot see it as yet. Finally is there anyway to know if the seat has explosive airbags or tensioners in it? Neverending electrical problems since it was in a recommended garage for 7 months having the engine repaired! |
||
Title: Re: Electric Seat Problems (Manual Override) Post by Snoopy on Oct 5th, 2007, 6:27pm AKAIK only the very later models had side airbags ... There should be some indication somewhere on the vehicle... If its the motor ...... they are easily replaced . |
||
Title: Re: Electric Seat Problems (Manual Override) Post by Matt on Oct 5th, 2007, 7:01pm if the seat has air bags there will be a little leather patch sewn on to the side of the seat, about half way up the side bolster |
||
Title: Re: Electric Seat Problems (Manual Override) Post by macw on Oct 5th, 2007, 7:40pm Thanks, mine was registered in Mar 1998 and I thought the last sold were in Aug 1998. It looks like it doesn't have airbags. As far as I can see the phillips screw holding the side cover on also should be able to manually adjust the seat. I tried but didn't want to force it took much. I'm wondering if this means something has jammed though I don't readily see have it will move one way and not the other unless it is electrical? Thanks for the help so far. Mark |
||
Title: Re: Electric Seat Problems (Manual Override) Post by Highlander on Oct 6th, 2007, 12:31am If you look at the bottom of the windscreen from outside where the vin number is, it will show the number of airbags fitted 2 or 4 (info there for use by the emergency services in case of an accident) |
||
Title: Re: Electric Seat Problems (Manual Override) Post by martin_rowe on Oct 6th, 2007, 8:54am you can by pass the module, trace the wires from the switch to the module, the corrisponding wires from the moudle to the motors are the same colour, cut & join, to do away with the module. just means there is no 'memory' function. |
||
Title: Re: Electric Seat Problems (Manual Override) Post by macw on Oct 6th, 2007, 2:19pm I pulled the module from my 95 12V my brother bent a little, awaiting repair. If anyone has a seat module available I'd be interested. Thanks again for all your help. Mark |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |