|
||
Title: Coolant hose problem in inaccessible places Post by grandadman on Jan 24th, 2008, 9:33pm Has anybody recently had to change THIS (http://www.x100p.co.uk/elbow_hose.html) little baby and can offer any assistance and Ford part number. It has cracked and is leaking coolant, water pump end, badly :( I should have changed this when I fitted the new water pump, having said that, hindsight is a wonderful thing yeah! ::) |
||
Title: Re: Coolant hose problem in inaccessible places Post by scorpio_man on Jan 24th, 2008, 9:50pm hi there which hose is it? http://img.photobucket.com/albums/v521/scorpio_man/scorpio%20bits/hoses.jpg |
||
Title: Re: Coolant hose problem in inaccessible places Post by grandadman on Jan 24th, 2008, 10:00pm Hi scorpio_man Top right- just under the cyl head, you will see the thermostat this component has 3 connections it is the elbow linking the water pump to the t/s which is nicely hidden under the A/C compressor motor. Click on my initial hyperlink to see its location. It is part of the circuit of hose 1 The part is not shown on this diagram - don't know why :-/ |
||
Title: Re: Coolant hose problem in inaccessible places Post by scorpio_man on Jan 24th, 2008, 10:12pm hi there 7334644 is a thick pipe to the middle of the t/s. 7334646 is a thin pipe to the top of the t/s. does this help? |
||
Title: Re: Coolant hose problem in inaccessible places Post by grandadman on Jan 24th, 2008, 10:48pm I think this is it it is a stumpy L shaped hose - I have updated my hyperlink HERE (http://www.x100p.co.uk/elbow_hose.html) with a pic of this hose. 7334644 is a thick pipe to the middle of the t/s. NOT hose #1 The part is not shown on your diagram - don't know why ??? |
||
Title: Re: Coolant hose problem in inaccessible places Post by scorpio_man on Jan 25th, 2008, 11:35am http://img.photobucket.com/albums/v521/scorpio_man/scorpio%20bits/thermostats.jpg 24= 7334644 is a thick pipe to the middle of the t/s. 12= 7334646 is a thin pipe to the top of the t/s. hth |
||
Title: Re: Coolant hose problem in inaccessible places Post by martin_rowe on Jan 25th, 2008, 4:41pm its 24 on that picture, tis a bit of a b--- to do, the clip bites into the hose & cuts it, best to use 'original' type ss hose clip, it dose'nt go on the water pump very far, doe the other one through the cyl head a couple of times also. |
||
Title: Re: Coolant hose problem in inaccessible places Post by grandadman on Jan 25th, 2008, 6:31pm Thanx scorpio_man you are a STAR - 24= 7334644 is a thick pipe to the middle of the t/s. this looks like the one :D Hi Martin - ss ??? hose clip have a look at my hyperlink again I have updated it because my Ford man couldn't find it either. Are these ss hose clamps the compression type??? the enlarged diag shows what looks like a Ford one on the t/s and a bog standard jubilee clamp at the water pump - agree ??? Thank fully I am halfway through the "tis a bit of a b--- to do" just need to get a new hose and two hose clamps and it's all downhill - I hope! |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |