Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Problem SOLVED
        
(Message started by: Chieftain on Feb 1^st, 2008, 2:30pm)

Title: Problem SOLVED
Post by Chieftain on Feb 1^st, 2008, 2:30pm

Well at last my loss of gears has been sorted (more or less) after Highlander and I discussed it we came to the conclusion it was the linkage pivot on the side of the gear box.

I know that other people had said check linkage and this was the first thing I did, BUT what I missed was the fact that there are two link bars. The bottom of the pivot arm had snapped allowing the linkage to pop out leaving the box in N.

So all I need is the pivot arm/bracket from the side of the box, good weather and I am on the road again. So if you have one let me know so I can make an offer.

Title: Re: Problem SOLVED
Post by tintin on Feb 1^st, 2008, 3:20pm

there will be one on my scrapper cossie, in Bridgnorth (not too far from you). if you go and take it off (im in edinburgh), it will cost you a bottle of wine for my folks (who have to put up with having it on their drive !).

any other bits you take will be subject to haggling with my mum, so beware, shes from aberdeen :D

cheers,

Title: Re: Problem SOLVED
Post by Chieftain on Feb 1^st, 2008, 5:08pm

on 02/01/08 at 15:20:04, tintin wrote:

Might take you up on that, I take it the box is still fitted? what colour is the car might be up for some haggling ;D

Title: Re: Problem SOLVED
Post by tintin on Feb 1^st, 2008, 8:31pm

http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=admin3;action=display;num=1168871995

;D yes, box is still fitted, drop me a pm if interested