|
||
Title: ect sensor Post by meatman on Apr 27th, 2008, 5:26pm hi all still have a few niggles with my wiring loom (cosworth 2.9 24v) however i have to the best of my ability replaced the wiring to the ect sensor it still does need a new plug though as the guides have split off my problem is the fans do not seem to cut in they work perfectly if you short them out via the relay which i have replaced i have also replaced the ect sensor and the temp guage sensor this afternoon i had the car idling for 40 minutes the temp guage gradually rose to halfway where it stayed for the remainder of the 40 minutes when i interogated the engine temp etc via the dash it was showing 79 for engine temp but it threw up the code 5-c for loc1 any help would be welcome as i would like to have the car on the road to waste some petrol whilst its 129 a litre lol regards mark |
||
Title: Re: ect sensor Post by Snoopy on Apr 27th, 2008, 7:12pm I think the code is SC see HERE (http://www.fordscorpio.co.uk/instreset.htm)for explanantion . The temperature os logramithic so 255 is cold and 0 is boiling .... HTH |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |