|
||
Title: My Bag of hammers" just became sledgehammers Post by grandadman on Jul 11th, 2008, 7:49pm I have got one hell of a knock in the engine [top end] now and I am going to have to strip the top end down to investigate ~ can anyone point me to a good set of instructions with pics or drawings for completely dimantling and removing the inlet manifold. I have a few more pics of HH where shal I post them ??? |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by Snoopy on Jul 11th, 2008, 8:10pm What engine is it? ALL the data can be found here on this page (http://www.fordscorpio.co.uk/index2.htm) and there is a search facility at the bottom of the page to help . :) |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by scorpio_man on Jul 11th, 2008, 8:11pm hi dave it's a 24v that was a harewood. ;) |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by Scorpio_Mike on Jul 11th, 2008, 8:20pm You can find a strip down and rebuild of the 24v on You Tube - genuine Ford training videos no less ! I found it one nighshift when things were quiet... |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by grandadman on Jul 11th, 2008, 8:20pm Thanks Andrew, Yeah my cossie has just developed this horrible knocking sound in sympathy with the engine revs - god knows what I am going to find. But as I go in this octopus looks like a jig saw puzzle to me and I wondered if there existed a set of dis/re-assembly instructions on the site covering this job? Cheers and Hi Dave - you well ? |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by scorpio_man on Jul 11th, 2008, 8:27pm hi there and it sounded sweet at harewood as well. :-/ http://www.fordscorpio.co.uk/CosV6manual.htm hth |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by Scorpio_Mike on Jul 11th, 2008, 8:38pm Ooops ! The You Tube videos are for the BOA engine. |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by grandadman on Jul 11th, 2008, 9:07pm Hi Got there! That's exactly what I was looking for thanx A. Yeah the car did sound good at HH but today I drove to the Metrocentre in Gateshead 'Angel of the North' territory which is just 10 miles or so away from my house for a spot pf shopping with my wife and on the way back the car started misbehavng itself. I stopped so that my wife could post a birthday card and the car would hardly start it did eventualy and Iit hobbled the last half mile home. The car was sick! and so was I. Scorpio_Mike Thanx for your input I have seen that BOA on You Tube and I rate it very highly pity Ford didn't do one for the BOB. Thanks to all I will report back the results of my investigational work 8) I have been very pre-occupied by these start up rattles for months! I hope........... CU in a bit :o |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by Tompion on Jul 11th, 2008, 9:56pm Pics here: http://www.fordscorpio.co.uk/24vrebuild.htm |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by Snoopy on Jul 11th, 2008, 10:14pm If you have more pictures of Harewood send them to me at my email address which I have PM'd to you . Cheers Dave |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by grandadman on Jul 11th, 2008, 10:57pm Will do. Cheers |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by Simmo on Jul 12th, 2008, 7:00am Good Luck with the car Grandad. Wasn't caused by the amount of shopping your good lady had bought was it !!? ???. Best wishes, Mike. |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by martin_rowe on Jul 12th, 2008, 8:49am Have spare BOB engine if interested. |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by grandadman on Jul 12th, 2008, 5:50pm Rain stopped play :-/ http://x100p.co.uk/inletman2.jpg This engine needs some TLC - after the diagnosis which I am dreading :( |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by scorpio_man on Jul 12th, 2008, 8:11pm hi there remember to take carefull note of where everything came from. write down the wiring order to the injectors as it's common to put them back on incorrectly. hth |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by grandadman on Jul 12th, 2008, 9:06pm Anybody know how to carefully remove this plastic pipe without knacking it ??? http://x100p.co.uk/bsp.jpg Thanks for the advice A I am following it btw I really do appreciate your assistance ;) |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by scorpio_man on Jul 13th, 2008, 1:39pm hi there the ford instructions say to push the ring in with a screwdriver. http://www.fordscorpio.co.uk/manual/engines/24v/24VEng&Trans.pdf page 4. hth |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by grandadman on Jul 13th, 2008, 2:00pm I'm going to sit down an hand write out a hundred lines [like the old school days] I must read instructions properly I must read instructions properly I must read instructions properly Thanks Andrew you are a star m8 ~I had the pipe removed in less than a minute with the correct info ;) |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by grandadman on Jul 13th, 2008, 6:17pm Me again - I thought I'd check the routing of the HT leads before removing them and I found THIS... (http://www.x100p.co.uk/edis6.html) didn't look correct to me, :-/ :-/ The numbers indicate which plug each lead ends up at 1-2-3 looks loigcal but 5-6-4 ??? |
||
Title: Re: My Bag of hammers" just became sledgehamm Post by grandadman on Jul 22nd, 2008, 12:46pm Has any member of our community got the following tools stashed away in their garage or attic ??? I need to hire, borrow, beg some of these... http://www.x100p.co.uk/esb21-140.jpg or, http://www.x100p.co.uk/osr.jpg or, http://www.x100p.co.uk/cit.jpg or even http://www.x100p.co.uk/vdrt.jpg The time has come for me to "get out and get under..," ::) |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |