Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Problems >> Heater only works on full! Resistor pack?
(Message started by: flygrip on Nov 25th, 2008, 10:54pm)

Title: Heater only works on full! Resistor pack?
Post by flygrip on Nov 25th, 2008, 10:54pm
Hi, another annoying problem needs sorting out. The heater only works on full speed, My 2.5TD heater control panel only has 3 dial knobs (no digital temp display). My guess is the resistor pack, can anyone help me to confirm this and advice me where to look for? Thanks in advance from freezing cold.    :'( :'( :'(

Title: Re: Heater only works on full! Resistor pack?
Post by Simmo on Nov 26th, 2008, 7:17am
I think THIS (http://www.fordscorpio.co.uk/acthermalfuse.htm) might be the answer to your problem.  :)

Title: Re: Heater only works on full! Resistor pack?
Post by heliphil50 on Nov 26th, 2008, 10:16am
Yes is the answer I had the same problem changed the thermal fuse no probs since 2years only cost £1.50 for fuse & 20p for crimp locks

Title: Re: Heater only works on full! Resistor pack?
Post by Froscio on Nov 26th, 2008, 10:20am
Have the same problem. Have only tested the resistors, never knew about the fuse. Thanks for the advice, will check it out.



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.