Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Heater Module non C.C.
        
(Message started by: gawsworthboy on Dec 29^th, 2008, 4:31pm)

Title: Heater Module non C.C.
Post by gawsworthboy on Dec 29^th, 2008, 4:31pm

Here we go again.....97 2.3 manual with 3 speed heater control. 2 months ago the blower stopped working in positions 1 and 2 but was fine on pos 3....on inspection could see the wires to the module terminals had melted....eek.....snipped off the burnt bits and connected some new wiring using plastic screw type connectors...all OK although still only working on position 3....Today the blower stopped working completly and the new wires have melted again!!!!!
Really worried about a potential fire now so will not repair again......can anyone suggest why the burn out....is there a relay that could cause this or should I get an autoelectrician to try and trace the fault? ??? :P ???

Title: Re: Heater Module non C.C.
Post by scorpio_man on Dec 29^th, 2008, 7:14pm

hi there

maybe just overheating because it's always running on high speed?

here's the repair anyway from the main site... http://www.fordscorpio.co.uk/acthermalfuse.htm

hth

Title: Re: Heater Module non C.C.
Post by gawsworthboy on Dec 30^th, 2008, 10:03am

Thanks Scorpio-man....will replace the module if I can get one and see what happens.