Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Ford Part Number to Pipe(BOB)
        
(Message started by: NiceMan on Feb 1^st, 2009, 6:08pm)

Title: Ford Part Number to Pipe(BOB)
Post by NiceMan on Feb 1^st, 2009, 6:08pm

http://www.riceracing.net/gal/displayimage.php?album=36&pos=14

Can somebody say what is Ford Part Code to this Pipe??
Pipe go From termostat to up to engine center Block, hole in left cylinder head.
http://www.riceracing.net/gal/displayimage.php?album=36&pos=2
Up head from that pipe go there where come that big pipe from Radiator...

Sorry my English...

Title: Re: Ford Part Number to Pipe(BOB)
Post by Snoopy on Feb 1^st, 2009, 7:09pm

Is it a water pipe or an air pipe .. It helps to identifiy it if you can tell us .....

I have some pictures somewhere try here http://www.fordscorpio.co.uk/leaks.htm tell us what number the pipe is and perhaps we can tell you the part number

Title: Re: Ford Part Number to Pipe(BOB)
Post by NiceMan on Feb 1^st, 2009, 7:37pm

Termostat not go air.... Its coolant =) Sorry but its number 12
http://www.riceracing.net/gal/displayimage.php?album=37&pos=14

Title: Re: Ford Part Number to Pipe(BOB)
Post by scorpio_man on Feb 1^st, 2009, 7:48pm

http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=admin4;action=display;num=1219256263

hth

Title: Re: Ford Part Number to Pipe(BOB)
Post by gozz on Feb 1^st, 2009, 8:41pm

7334646 if you can find one in the world ???
GOZZ.

Title: Re: Ford Part Number to Pipe(BOB)
Post by NiceMan on Feb 1^st, 2009, 9:44pm

Thanks, i try find... My is broke...

Title: Re: Ford Part Number to Pipe(BOB)
Post by emcscott on Feb 2^nd, 2009, 11:38pm

Hi - I had this problem - hose not available from Ford- so I made up a pipe by joining a piece of straight 22mm to a 45deg piece of 32mm. to join them use a copper 45deg bend in 22mm- you will have to cut the lengths carefully and there is just room for the two jubilee clips to fit on the outside of the cylinder head, above the thermostat. Mine has done a few thousand miles now and it 's not lost any water- yet !!

Title: Re: Ford Part Number to Pipe(BOB)
Post by NiceMan on Feb 3^rd, 2009, 5:09am

Ok thanks, one place say at take 3-4 days, they order from sweden... say at at there found pipe.... 23€