|
||
Title: ballooning radiator Post by a900one on Jun 14th, 2009, 7:29pm I think my radiator has ballooned, :- :'(it leaks as small bit on the drivers side and the top is not level I have not had time to check the bottem. Are the thermostats a pain to get hold of still, I think some people on here had to wait a long time. |
||
Title: Re: ballooning radiator Post by Highlander on Jun 14th, 2009, 8:50pm Still available for £100! My personal opinion is that the 24v radiators have a prodution flaw, fitting a 16v radiator and header tank seems to work fine without having to change the 24v stat |
||
Title: Re: ballooning radiator Post by a900one on Jun 14th, 2009, 10:44pm I have not had a problem with the temp of the engine, it comes up to normal and just stays there,and it would indicate the thermostat is working ok. Also I cant see why a faulty stat would make the rad bend as it appears to have done. I would agree with you Highlander it a fault with the rad . Ps its had a new header tank just after I bought it , is there a difference in header tanks. Next problem if I have it recored do I ask for a 24v core or a 16v. |
||
Title: Re: ballooning radiator Post by a900one on Jun 14th, 2009, 10:55pm What is available for £100 ??? |
||
Title: Re: ballooning radiator Post by Highlander on Jun 14th, 2009, 10:56pm Yep, 24v header tank isnt a problem itself, it has an extra outlet to the top of the 24v radiator so if you fit a 16v or 12v you either need to block it off or fit the two outlet header tank. I and a few other have done this and so far there have been no problems, (mines run nearly fours years with a 16v rad now) I wouldnt get a recore, you can pick up NEW 16v rads very cheaply, check ebay..none on just now but they come on regularly |
||
Title: Re: ballooning radiator Post by amigafan2003 on Jun 15th, 2009, 8:17am Quote:
The 24v thermostat. |
||
Title: Re: ballooning radiator Post by NiceMan on Jun 15th, 2009, 6:30pm So expensive... soon need fix new termostat inside that pipe... ITs not problem. |
||
Title: Re: ballooning radiator Post by Baz on Jun 15th, 2009, 8:58pm I once changed the stat and put a new radiator and expansion bottle on all at once. The bloody thing still ballooned!! |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |