Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> 24v engine wiring loom
        
(Message started by: tootman318 on Jun 24^th, 2009, 5:27pm)

Title: 24v engine wiring loom
Post by tootman318 on Jun 24^th, 2009, 5:27pm

???hi guys, just noticed my engine loom is falling to pieces!!!!!!!! every connector for sensors, injectors has bare wires showing and some are even touching the wire next to it. i'm amazed car is still running ok. touch wood! how difficult is it to rewire engine loom? looks bit tight for access under plenum.

Title: Re: 24v engine wiring loom
Post by wojtekor on Jun 24^th, 2009, 5:42pm

well cossie loom in comparison to 16v is a nightmare but still doable with a soldering iron and over 200m of wire.

Title: Re: 24v engine wiring loom
Post by Highlander on Jun 24^th, 2009, 8:12pm

on 06/24/09 at 17:27:58, tootman318 wrote:

! how difficult is it to rewire engine loom? looks bit tight for access under plenum.

You'll need to remove it to do it

Title: Re: 24v engine wiring loom
Post by wojtekor on Jun 24^th, 2009, 8:33pm

on 06/24/09 at 20:12:37, Highlander wrote:

You'll need to remove it to do it

thought that was obvious }{ ::)

Title: Re: 24v engine wiring loom
Post by gozz on Jun 25^th, 2009, 12:35am

Obviously not 8)
GOZZ.

Title: Re: 24v engine wiring loom
Post by pappa on Jun 26^th, 2009, 10:55pm

It takes hours and if you do it, try to re-route the wires where possible outside. I know a couple of guys who have done it.

Title: Re: 24v engine wiring loom
Post by budgie on Jun 27^th, 2009, 2:35am

the loom on my cossie had to be totally rebuilt by my friend who is an electrical engineer.took him longer than he thought it would.i did give him another one to do ,which i got off one of the members,to do in his spare time just in case anyone on here needed one.i could find out if he got round to doing it if you wanted me to.

Title: Re: 24v engine wiring loom
Post by tootman318 on Jun 27^th, 2009, 9:47am

that would be great if you could. dont want to leave it to long

Title: Re: 24v engine wiring loom
Post by NiceMan on Jun 27^th, 2009, 12:24pm

on 06/26/09 at 22:55:37, pappa wrote:

It takes hours and if you do it, try to re-route the wires where possible outside. I know a couple of guys who have done it.

I know one who make.... Me... =)

Real its not so bad make what its look... one weekend maybe can make full cabel and take car works if wants.

http://www.riceracing.net/gal/thumbnails.php?album=36

Some photo from my cabel work...