|
||
Title: 24v engine loom Post by Glyn on Feb 16th, 2010, 2:08pm My cossie has a faulty loom . The insulation is cracked on the wires where the loom passes in front of the block. Are these still available or will I have to make up a section myself ? 1995 24v saloon |
||
Title: Re: 24v engine loom Post by tootman318 on Feb 16th, 2010, 6:47pm They are available from ford(if you can wait and have a fat wallet) but best do it yaself, not hard but time consuming!! ??? |
||
Title: Re: 24v engine loom Post by Glyn on Feb 17th, 2010, 11:43am THANKS FOR THAT.LOOKS LIKE A LONG HAUL ! |
||
Title: Re: 24v engine loom Post by Glyn on Mar 1st, 2010, 3:06pm Update .Local Ford dealer says now withdrawn and last known price was £1500 + vat !! Glyn. |
||
Title: Re: 24v engine loom Post by essexstu on Mar 7th, 2010, 10:53pm Spent today doing mine.... stripped the engine loom out the car... Thought was patchable, but the more you touch it, the more the wiring insulation comes off So ended up doing pin out checks frm the ECU to connectors C110 and C113 on the os chassis rail to confirm the car side harness was good, which it was And then with the loom removed, going from pin to pin, cutting, renewing, soldering and heat shrink every connector, and ugh is it time consuming, have done 45 meters of wiring so far and still more to do But beats £1000 for the loom! Guy on ebay in GReece is selling a loom at the moment, but said its had some multiplugs removed, might be worth an option if not 100% on wiring! |
||
Title: Re: 24v engine loom Post by Glyn on Mar 8th, 2010, 2:59pm Thanks essexstu - sounds like its better to slog it like you - made a start ! Glyn |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |