|
||
Title: The ABS warning light remains on Post by runsun on Mar 24th, 2010, 12:33pm Ford Scorpio -96 DOCH 2.016V After replaceabled the front brake blocks at left/right side, the ABS warning light start to light - and it remains on when engine is running ! >:( Is it possible to measure the signal from the wheel-sensors with a mulitmeter ? :-/ Any ideas }{ Reg. Rune, Norway |
||
Title: Re: The ABS warning light remains on Post by Snoopy on Mar 24th, 2010, 5:17pm If it stays on after you have had a run in the car then it is most likely that you have disturbed the connections under the front wing where the ABS cable is clipped . There is a plug there which can be detached and cleaned and then recovered in water pfroof grease. The ABS Brake fault finder is HERE (http://www.fordscorpio.co.uk/abssystem.htm) |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |