|
||
Title: How to delete airbag indication? Post by nobbel on Jan 11th, 2012, 2:53pm Hi, I did a little job behind the instruments and had replaced the steering-wheel. The airbag-plug wasn't fixed corectly, so I got the indication "1" (driver's airbag - no connection/open circuit) by the airbag-lamp. I fixed the little yellow plug correctly, but the indication "1" is still there. My question: has the indication to be deleted by software, that means the testing-unit? If not, I have to check the plug again. Werner |
||
Title: Re: How to delete airbag indication? Post by Tompion on Jan 11th, 2012, 3:20pm You don't need to clear the code. Look at the wheel, there's a lug that can lever the plug off when you use the horn. Fit the yellow plug in the direction so that will not happen. |
||
Title: Re: How to delete airbag indication? Post by Tompion on Jan 11th, 2012, 3:25pm This is the wrong way, you can see the lug below the plug. http://i.imgur.com/fQdC15E.jpg |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |