|
||
Title: Scorpio Headlights, Post by raybythesea on Feb 12th, 2013, 8:21pm Having changed the bulbs which has been very effective, they are not quite level, where are the levelling screws, the manual says go to a garage! Secondly I see you can pop out the front lens, what the best way of popping out and do you need a lubricant to reseal the glass. many thanks, Raymond |
||
Title: Re: Scorpio Headlights, Post by Simmo on Feb 12th, 2013, 9:03pm Try looking at This (http://www.fordscorpio.co.uk/images/headlamp.gif) and reading This (http://www.fordscorpio.co.uk/headglass.htm) |
||
Title: Re: Scorpio Headlights, Post by Matt on Feb 12th, 2013, 9:16pm dont try and remove the round projector lense, it cracks very easily, to clean it use some meths or similar on a cotton rag and feed it behind the lense |
||
Title: Re: Scorpio Headlights, Post by amigafan2003 on Feb 12th, 2013, 9:34pm On the article that Simmo linked you can see the two adjusting screws at the top of one of the pics - a pair of yellowish coloured screws - almost like bolts really (M10 size iirc). http://www.fordscorpio.co.uk/images/hlamp01.jpg |
||
Title: Re: Scorpio Headlights, Post by Tompion on Feb 13th, 2013, 2:22am Were they not quite level before or just since changing the bulbs? You can put them in wrong (with the flat on the bulb flange not located correctly) so that they don’t sit flat in the housing. The PDF for adjustment is here: http://www.fordscorpio.co.uk/exteriorelec.htm |
||
Title: Re: Scorpio Headlights, Post by raybythesea on Feb 13th, 2013, 9:37am Thanks for help from everyone, will check fitting but am sure they were Ok, can't say I noticed before, you always check when you change anything, it is only very slightly out, its just that I like things perfect. Raymond |
||
Title: Re: Scorpio Headlights, Post by Mike H on Feb 17th, 2013, 1:40pm And I'd just replied to this effect on the other thread ;D |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |