Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Engine stops in (R) and (D) -96, 2.0doch16v aut.
        
(Message started by: runsun on May 16^th, 2013, 9:26am)

Title: Engine stops in (R) and (D) -96, 2.0doch16v aut.
Post by runsun on May 16^th, 2013, 9:26am

NEED HELP !!! Suddenly my Scorpio starts to misfire when gearshifter are engaging into Drive(D) or Reverse(R) . It seems that some wiring have poor conection. The misfiring only happen when I pull the gear lever into (D) and (R).
Sometimes(more and more) the engine stop running when gear lever are engaging (R) and (D) !

Engine always starts in (P) and (N).

I'm suspecting the transmission switch to port 64 at the PCM (EEC) have poor conection.

Reg. Rune S.- Norway :-/

Title: Re: Engine stops in (R) and (D) -96, 2.0doch16v au
Post by Dave2302 on May 17^th, 2013, 9:39am

First thing is to change the PRNDL switch on the gearbox, failing that it's in the wiring loom :(

HTH

Dave

Title: Re: Engine stops in (R) and (D) -96, 2.0doch16v au
Post by runsun on May 17^th, 2013, 1:52pm

Thanks Dave !

I'm not sure how to fix this or change the PRNDL switch ?
Do you have any tips or guidelines Dave ?

reg. Rune - Norway

Title: Re: Engine stops in (R) and (D) -96, 2.0doch16v au
Post by Tompion on May 17^th, 2013, 6:21pm

Also called TRANSMISSION RANGE SENSOR (TRS)

Have a look here:

http://www.fordscorpio.co.uk/trsdata.htm

& towards the end of this page:

http://www.fordscorpio.co.uk/ccmonitor.htm