Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Problems >> wiring and fault codes 2.9-12V BRF
(Message started by: Einar on Feb 27th, 2014, 10:17pm)

Title: wiring and fault codes 2.9-12V BRF
Post by Einar on Feb 27th, 2014, 10:17pm
Hello, I am new here.
I have a `96 2.5 TDI Turnier, and I also have a `85 Granada mkII Turnier with a engine from a Scorpio, I have som question I hope You can help me with.

First I hope som of you can tell me what Pin 19 on the ECU goes to, I have heard Kikdown, but I`m not sure, on my car this cable is black/Green.
Then I hope som of you can tell me the wiring of OD and Lock-up from ECU to Automatic transmission. Is it pin #15 and #53. And how are they wired at the gearbox?

I have mounted this BRF-engine in a Granada with manual transmission and need to trick the ECU.

I have the following DTC`s:
67
86
89
76
30

I think most of them are missing transmission.

With another ECU(manual) I get 52 and 29(29 is missing VSS, 52?)

Maybe some of you can help me out, I would be thankful.

(Please excuse my English, I`m from Norway)

Greetings from Norway, Einar

Title: Re: wiring and fault codes 2.9-12V BRF
Post by Andycan on Feb 27th, 2014, 10:29pm
Welcome to the group Einar. There are a couple of members here that have all the information you require but sometimes it can be a few days to answer your questions.

Your english is very good.  Andy

Title: Re: wiring and fault codes 2.9-12V BRF
Post by Einar on Feb 28th, 2014, 6:17am
Thanks Andycan, it seems to be a lot of information in this group, so I will just wait :-)



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.