|
||
Title: scorpio 16v 2.0 pas pressure pipe Post by jls1936 on Sep 24th, 2014, 5:05pm I have been losing some fluid, local garage says the pressure pipe no. 1 shown on ford schematic has a crack in it. Can anyone suggest where I can get a replacement. jls1936 |
||
Title: Re: scorpio 16v 2.0 pas pressure pipe Post by Scorpio_Mike on Sep 24th, 2014, 5:39pm See if you can find a local company which makes hydraulic hoses - don't think these pipes are available from Ford anymore but if they are will probably cost a fortune. |
||
Title: Re: scorpio 16v 2.0 pas pressure pipe Post by Simmo on Sep 24th, 2014, 6:28pm A quick Google search brought up This Company (http://www.pirtek.co.uk/) and I think it was the same Company who sorted out Pegasus's car in London recently. :) |
||
Title: Re: scorpio 16v 2.0 pas pressure pipe Post by a900one on Sep 24th, 2014, 10:06pm Yep ford have runout of them, Mat may have a spare, he offered me one with out the switch when mine sprung a leak. As Simmo says Pirtek can repair yours. |
||
Title: Re: scorpio 16v 2.0 pas pressure pipe Post by jls1936 on Sep 25th, 2014, 6:16pm I have been to se a local Pirtek guy in Derby. he said maybe he could do a repair but I would have to bring the pipe in. How big a job is it to remove and replace it? I would have to get the garage to remove it, and if Pirtek can not be repair it. I'm left with a car I can't move. The mechanic who inspected it said it had a crack where there is a crease in the pipe. |
||
Title: Re: scorpio 16v 2.0 pas pressure pipe Post by a900one on Sep 25th, 2014, 10:32pm It is very simple to remove, one bolt on the rack end a support bracket and union nut on the pump. |
||
Title: Re: scorpio 16v 2.0 pas pressure pipe Post by jls1936 on Sep 27th, 2014, 10:34am I am away until nov. so I will try to get it repaired when I come back. Just in case if anyone has a spare pipe I would appreciate you getting in touch. |
||
Title: Re: scorpio 16v 2.0 pas pressure pipe Post by Pegasus on Sep 28th, 2014, 9:08pm By repair I think they mean replace: they need the old 1 for the fittings and they'll just put a new hose in-between. See here (http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=Problems;action=display;num=1403813764) for info. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |