Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> MS3X wiring to Scorpio multi plug. 
        
(Message started by: Ghia15 on Mar 29^th, 2019, 11:22am)

Title: MS3X wiring to Scorpio multi plug.
Post by Ghia15 on Mar 29^th, 2019, 11:22am

Hi, been a while since I have been on here.

I was just wondering if anyone on here can help me?

I am trying to wire in my BOB to my Capri using megasquirt MS3X.

I was just wondering where the power for the different components comes from such as idle control valve and injectors.

I am wiring into the bulkhead C110 connector but not sure where the power comes from as all I can see from the sheet is the switched earth for the ECU.

Any help is much appreciated.

Title: Re: MS3X wiring to Scorpio multi plug.
Post by Tompion on Mar 29^th, 2019, 4:13pm

I've had no dealings with the 24v. The PDF diagram show injectors & idle control power spliced together from the same pin all violet as the main colour - but doesn't give the pin number.

On the 2.3 it's violet/blue to pin 38 of C110 so possibly the same, it's a 1.5 wire through C110 up to the splice so should stand out from the .75 wires in C110.