Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Ford Scorpio II won't crank
        
(Message started by: bobjazz on Jul 6^th, 2021, 9:09am)

Title: Ford Scorpio II won't crank
Post by bobjazz on Jul 6^th, 2021, 9:09am

Hello. My Ford Scorpio II Ghia 2.0i 16V (1995) VIN WF0FXXGAGFSY98448 is stopped in the workshop. Since there was an anomaly in the abs tcs system, we had the abs control unit overhauled. After putting the abs control unit back on, the engine did not start anymore and the led on the dashboard started flashing quickly. The error U1147 lack of communication between the engine control unit and pats was diagnosed. We checked all the cables and they are fine (I had already had the motor harness redone). Has anyone had the same problem as me?

Title: Re: Ford Scorpio II won't crank
Post by theogrenietis on Jul 8^th, 2021, 7:26am

I would look at the EDIS module, as it is right next to the ABS unit, maybe it is something as simple as a disconnected connector from the EDIS module?

Title: Re: Ford Scorpio II won't crank
Post by szinyei on Apr 30^th, 2022, 8:11pm

Try connecting the cranshaft sensor directly to the EDIS4. Remember cutting the cables right by the unit...