|
||
Title: Headlights always on Post by Tekno on Jan 23rd, 2011, 9:47am In many countries driving lights must be always turned on when driving if car doesn't have DRL -lights. Many of the new cars have automatical lights, so the driver does not need to turn the lights themselves. It is a nice feature and eliminates the possibility that the lights aren't remembered to switched on. Here is quick and easy light mod for Ford Scorpio: 1. Detach switchgear. instructions are here at part "Lighting Switchgear": http://fordscorpio.co.uk/fasciabulbs.htm 2. Disconnect connectors and make some room for soldering procedure (I removed fascia) (Image 1) 3. Connect two wires together for headlights. (Image 2) 4. If you want Front+Rear parking lights to illuminate as well, connect two more wires. (Image 3) 5. If you want Register plate bulbs to illuminate (Image 4) http://ruohoranta.fi/singapore/galleries/sekalaiset/Scorpio-98/_thumbs/700x500-DSC05605_EDIT.JPG Image 1 http://ruohoranta.fi/singapore/galleries/sekalaiset/Sekalaiset/Muut%20DIY-jutut/Automaattivalot/_thumbs/700x500-DSC05591_EDIT.JPG Image 2 http://ruohoranta.fi/singapore/galleries/sekalaiset/Sekalaiset/Muut%20DIY-jutut/Automaattivalot/_thumbs/700x500-DSC05591_EDIT2.JPG Image 3 http://ruohoranta.fi/singapore/galleries/sekalaiset/Sekalaiset/Muut%20DIY-jutut/Automaattivalot/_thumbs/700x500-DSC05591_R.JPG Image 4 Now lights turn on when Ignition is switched on, and turn off when Ignition is switched off. http://ruohoranta.fi/singapore/galleries/sekalaiset/Sekalaiset/Muut%20DIY-jutut/Automaattivalot/_thumbs/700x500-DSC05594.JPG For a purist car electrician, next steps would be: - Add relay to turn dipped beams off when key is in start position. (But I guess bulbs, even xenon still have enough lifetime with this coupling..) - Schottky diodes between connections. 1N5817 is good, has very low forward voltage drop. These instructions apply to -98 German import Left hand drive Scorpio with foglamps, no idea if selector gear or pinout is different to others. UPDATE: http://img375.imageshack.us/img375/3277/kytkent2.png Blue/black comes fron ignition lock (start+) and is to keep lights off during starting. Problems now: - Foglights not working. Solution?: Get voltage to pins? 8? 10? HEADLAMPS_LHD.pdf page 4 - If ignition is not turned on, impossible to have dipped beam working. That's because of GND->12. Solution?: to use not pin 9 but ? - Pin 9 starts to feed ignition, making car unable to shutdown, if lights switch is on not turned off. Solution?: Diode... |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |