|
||
Title: Breaking, '97 2.3 Ultima Post by pinxtonpete on Apr 29th, 2006, 11:55am Hi folks, after yet another expensive payout on my car to find I had another problem with the bottom end I have decided to break her. All parts are available except the front bumper. She has a single point gas conversion too. Front wishbones and bushes less than 4k from new, unmarked leather, all electrics working. Call me on 07903230693 for info or of course.. on here ;D |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Jim on Apr 29th, 2006, 12:17pm Is the short A/C line that runs between the condenser and the accumulator/dehydrator in front of the radiators available. 2.3 engine, auto gearbox. Operation 34 643 0 in aircon handbook http://www.fordscorpio.co.uk/manual/aircon/refriglineacc2rcond.pdf |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Baz on Apr 29th, 2006, 12:33pm Looking for the all important rear mudflaps!!! Thanks Baz |
||
Title: Re: Breaking, '97 2.3 Ultima Post by bizzay1 on Apr 29th, 2006, 3:31pm Inlet Manifold plz !!! :D :D |
||
Title: Re: Breaking, '97 2.3 Ultima Post by pinxtonpete on Apr 29th, 2006, 5:31pm hi, I have all parts so far, i will get photos and send them to you later, sorry Bizzay but the manifold is the one you saw on Ebay, ends tonight, quite a few watching it at the moment but could be a good buy if noone bids, cost me a fortune :-( |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Baz on Apr 29th, 2006, 5:45pm so you have the rear mudflaps pete? Baz |
||
Title: Re: Breaking, '97 2.3 Ultima Post by scorpio_man on Apr 29th, 2006, 6:22pm hi barry fordpartsuk.com are selling a set of 4 for about £50 if that's any good. :) hth |
||
Title: Re: Breaking, '97 2.3 Ultima Post by bizzay1 on Apr 29th, 2006, 6:25pm I have a bid going on with a sniper at the last min don't know if it will be enough though :( Thought this might have been another option, cheers |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Baz on Apr 29th, 2006, 7:14pm Thanks Andrew, but I have the fronts.... |
||
Title: Re: Breaking, '97 2.3 Ultima Post by stafford on Apr 30th, 2006, 9:44am do you have the locking key for the alloy wheel centre plates..urgently needed... |
||
Title: Re: Breaking, '97 2.3 Ultima Post by pinxtonpete on Apr 30th, 2006, 11:15am I have 2 of the keys but aren't the keys different on all the cars for security? I'm not sure, maybe someone else knows the answer, |
||
Title: Re: Breaking, '97 2.3 Ultima Post by tintin on Apr 30th, 2006, 1:54pm is the cd changer available? |
||
Title: Re: Breaking, '97 2.3 Ultima Post by stafford on Apr 30th, 2006, 3:58pm ok I will ask Ford on tues |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Snoopy on Apr 30th, 2006, 4:11pm The cover plates on the alloy wheels all take the same standard three pin key to remove them .... THE wheel nuts however are different I think there are 26 differnt ones |
||
Title: Re: Breaking, '97 2.3 Ultima Post by mazzy_j on Apr 30th, 2006, 4:34pm Do you still have the rear callipers at all? Thanks, Matt |
||
Title: Re: Breaking, '97 2.3 Ultima Post by pinxtonpete on Apr 30th, 2006, 6:27pm hi tintin, yes, i have the multichanger, fully working, i have the estate so if you have the saloon you will need the other brackets, Mazzy, yes, i have the rear calipers, again, fully functioning PMs sent |
||
Title: Re: Breaking, '97 2.3 Ultima Post by purple-rocket on Apr 30th, 2006, 7:00pm have you got the battery cover by any chance, also after another remote fob cheers Paul |
||
Title: Re: Breaking, '97 2.3 Ultima Post by johne on Apr 30th, 2006, 9:31pm hi all. im looking for a rear bumber |
||
Title: Re: Breaking, '97 2.3 Ultima Post by pinxtonpete on May 1st, 2006, 12:10pm Got the rear bumper and battery tray, pms sent |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Kenboy on May 1st, 2006, 6:53pm Hi I am looking for an HBC?. Kenboy |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Chad66 on May 2nd, 2006, 1:31pm Is it an auto?....and does it have the dark grey trim I am after the trim surround to the gearshift lever and the trim containing the 'trinket tray' and handbrake that leads up to the centre storage box....all due to the alien blood mirror syndrome... Cheers |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Baw_Flinger on May 2nd, 2006, 2:47pm After the wishbones, PM sent :) |
||
Title: Re: Breaking, '97 2.3 Ultima Post by johne on May 2nd, 2006, 6:29pm on 05/01/06 at 12:10:36, pinxtonpete wrote:
|
||
Title: Re: Breaking, '97 2.3 Ultima Post by johne on May 2nd, 2006, 6:33pm how much for the bumber |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Atlantic_blue on May 3rd, 2006, 1:03pm Hi Pete, Have you got the high level brake lamp? if so i would like to buy it. Best regards Eric |
||
Title: Re: Breaking, '97 2.3 Ultima Post by roger_howes on May 3rd, 2006, 1:25pm Hello there, I need the red door-open warning light for the front passenger door - the rectangular one that sits in the edge of the door and comes on when the door is open - both the lens and the bulb holder please if you have them. Thanks. Roger. |
||
Title: Re: Breaking, '97 2.3 Ultima Post by DJWerkz on May 3rd, 2006, 4:32pm I am lookign for a dash assembly, the crash pad and wood effect fascia in perfect condition with no cracks, scratches and breakages anywhere, especially with any of the fixings. Can you help? If so send me a PM where you are and how much would would want for these two items. |
||
Title: Re: Breaking, '97 2.3 Ultima Post by the_machine on May 3rd, 2006, 11:43pm looking for rear bumper please, or anyone out there with rear bumper URGENT as usual :-) |
||
Title: Re: Breaking, '97 2.3 Ultima Post by 24vGal on May 7th, 2006, 7:26pm hi I'm looking for a pair of rear facelift indicator clusters. Please can you help? |
||
Title: Re: Breaking, '97 2.3 Ultima Post by pinxtonpete on May 7th, 2006, 10:06pm sorry, she is pre facelift, i still have the RHS one.. it's an estate. |
||
Title: Re: Breaking, '97 2.3 Ultima Post by 24vGal on May 8th, 2006, 12:28pm Cheers but mines a saloon. |
||
Title: Re: Breaking, '97 2.3 Ultima Post by jonnycab on May 9th, 2006, 2:19pm Would you have the air con compressor pump? |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Baw_Flinger on May 9th, 2006, 3:05pm Did you get my PM agout the wishbones? Please drop me a line. Cheers :) |
||
Title: Re: Breaking, '97 2.3 Ultima Post by adowds on May 11th, 2006, 11:00pm Hello! I need a replacement clockspring connector for a Cossie Ultima. It's got two multiplugs each end, for the airbag and cruise buttons. Also all the wee screws and fittings that hold it on. Also, if you have a trip computer button module with all the green LEDs working, I'd like one of those... Mine works but two LEDS are dead. |
||
Title: Re: Breaking, '97 2.3 Ultima Post by hepburn on May 16th, 2006, 3:02pm leather interior available? if so, what colour? |
||
Title: Re: Breaking, '97 2.3 Ultima Post by pinxtonpete on May 18th, 2006, 12:00pm sorry, the leather has gone now, Pete |
||
Title: Re: Breaking, '97 2.3 Ultima Post by clarricks on May 19th, 2006, 6:16pm Hi, have you got an ignition coil and also the rear calliper? please |
||
Title: Re: Breaking, '97 2.3 Ultima Post by Matt on May 21st, 2006, 6:28pm hi bit of an engine shopping list have you got the cylinder head, cam pullies and the chain? thanks |
||
Title: Re: Breaking, '97 2.3 Ultima Post by bigstu on Jun 14th, 2007, 6:04pm hi could do with engine wiring loom.it runs from o/side inner wing up to engine and down to auto box |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |