Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts For Sale >> 2.0 and 2.3 engine bits
        
(Message started by: Matt on Jun 1^st, 2006, 7:22pm)

Title: 2.0 and 2.3 engine bits
Post by Matt on Jun 1^st, 2006, 7:22pm

hi all,

ive got a few bits and pieces left over from doing my project estate,

2.0 (16v) stuff:
rocker cover, crank sensor and cover for the ignition coils
rad bottom hose
water bottle with float switch (will need cleaning out)
fule rail (but the rubber pipes are missing)
plate that covers the cam pullies ar the front of the engine

2.3 stuff:
set of cams (excellent condition)
bearing caps to go with cams
egr valve and pipe
throttle w/cable bracket
thermostat front cover (for the large diameter pipe)
air intake pipe from throttle to resenator

Title: Re: 2.0 and 2.3 engine bits
Post by jonnycab on Jun 3^rd, 2006, 1:21am

You got a 2.3 inlet manifold going Matt?

Title: Re: 2.0 and 2.3 engine bits
Post by Matt on Jun 3^rd, 2006, 4:40pm

hey

sorry jonnycab i havent, the part where the small coolant hose conencts on the thermostat broke off, so i dumped it

sorry :(

Title: Re: 2.0 and 2.3 engine bits
Post by scorpioghia on Jun 4^th, 2006, 6:25pm

hi there have you got the exaust manifold for a 1997 2.3 manual?
dont know if there is any differance between auto and manual

Title: Re: 2.0 and 2.3 engine bits
Post by Matt on Jun 4^th, 2006, 6:35pm

hi

i do but it has a large crack in it, doesnt seem to leak though,

as it's damaged you can have it free of charge but you will need to pay the postage or collect, im in birmingham

matt

Title: Re: 2.0 and 2.3 engine bits
Post by scorpioghia on Jun 4^th, 2006, 7:13pm

thats the reason i am changing mine due to it being cracked cheers matt anyway

Title: Re: 2.0 and 2.3 engine bits
Post by 2tired on Jun 6^th, 2006, 11:18pm

Hi Matt

Have you still got the 2.0 litre 16v coilpacks? I'm also interested in a main fusebox, the passenger seatback adjuster wheel and fixings that hold it to the seat, and the little plastic cover that caps the PATS light on top of the dash.
I'm interested in the coilpacks and fusebox as backups in anticipation of failure at some point in the future.
PM me and let me know the cost if you have any of the above items.
Thanks
Kevin

Title: Re: 2.0 and 2.3 engine bits
Post by Matt on Jun 7^th, 2006, 7:50pm

hi 2tired

yep i do have the coil packs, the other stuff is still on the car at the scrappy, i'm going back there on saturday to get a few more bits off it, so i'll let you know on the rest of the items :)

i'll PM you about the coilspacks (price,delivery etc...)

Title: Re: 2.0 and 2.3 engine bits
Post by Matt on Sep 8^th, 2006, 6:53pm

Ive Still got the above bit if any one need anything

Matt :)

Title: Re: 2.0 and 2.3 engine bits
Post by shaun on Sep 10^th, 2006, 7:42am

http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=admin3;action=viewprofile;username=scorpioghia
if you still after a ex mannifold ive got one ,shaun wolverhampton ,,with no cracks