|
||
|
Title: Breaking 2.9 cosworth estate 1996 Post by chaps987 on Aug 5th, 2006, 9:00am I'm reluctantly breaking a red 2.9 cosworth estate 1996 on an N plate. Car is a non runner due to engine wiring loom in need of replacement. A few bits have already gone but lots still there. Contact via the forum or by email at tezpil@ntlworld.com. I'm in the portsmouth area if thinking about collection of any large items. cheers. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Zombie on Aug 15th, 2006, 10:07am Have you got the load cover? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by cossieguy on Aug 15th, 2006, 10:43am Have pm'd you chaps. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Kjetil S on Aug 15th, 2006, 8:13pm Sent you a pm. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by adowds on Aug 17th, 2006, 6:24pm What condition is the engine cover in? The plastic bit with 'Cosworth 24V' written on it? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Aug 17th, 2006, 8:05pm Looks fairly good condition silver colour writting on and looks okay, badge in place, can post tomorrow if interested |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by twinturbo on Sep 3rd, 2006, 9:27pm Do you still have this? May be intereste d in a few bits.. Engine, box, tailgate latch, wheels... TT |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 4th, 2006, 11:41am pm sent. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by DJWerkz on Sep 4th, 2006, 11:52am I am looking for the plastic shroud that covers the ac top up valve and air intake pipe just in front of the rad to the right. I am also looking for any under car plastic covers. I have the under engine tray but my mechanic says it looks like there should be at least one other in place under the gearbox. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 4th, 2006, 12:10pm I've got the plastic shroud by the air con valve and the air inlet pipe, nothing from underneath though. pm sent |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by cossieguy on Sep 4th, 2006, 1:35pm Chaps have you got the r/h (Passenger side) heat shield, down near starter motor? If so would be very interested! |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 4th, 2006, 1:52pm I've got the shield that fits near the dip stick but I think you want the one thats lower down the engine which is already gone. if its the higher one you are welcome to it. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by cossieguy on Sep 4th, 2006, 2:30pm Yes it is the one just below the one next to dip stick that i need, will try parts wanted,thanks anyway. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Matt on Sep 4th, 2006, 9:32pm hey what radio is installed in it? and does it have the cd changer? matt :) |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 5th, 2006, 5:08pm it's a 7000RDS with 6 cd changer.. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 8th, 2006, 5:58pm adowds hopfully you got the pic of the engine cover , what do you think?? chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 8th, 2006, 6:00pm djwerkz air con shroud ready for posting , should be on it's way saturday chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by tintin on Sep 10th, 2006, 1:33pm Hi, Have you still got the IAT on the car? How much? Cheers |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 10th, 2006, 1:56pm IAT available, pm sent. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Matt on Sep 10th, 2006, 6:48pm have you got the radiator bottom hose? matt |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 10th, 2006, 7:21pm hi matt, I've got the bottom hose, pm sent chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by twinturbo on Sep 10th, 2006, 7:25pm was the drivers rear arch rust free? I need to let in some new metal on mine. TT |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Matt on Sep 10th, 2006, 7:30pm hi chaps pm sent back thanks matt :) |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 10th, 2006, 8:31pm matt hose should be off tomorrow and will post.......... chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 10th, 2006, 8:32pm twin turbo, rust I'm afraid......... |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 11th, 2006, 7:45am tintin pm sent items will be off car today and then in post chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by edds on Sep 11th, 2006, 10:45am Hi chaps. i`m after a pair of rear shocks and a steering rack, i have the 2.5 diesel ghia estate and wondered if you still had them and would they fit mine? if so how much cheers |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 11th, 2006, 7:48pm sorry need to beable to steer the car off my drive for the time being, also not sure about compatibility of shocks either, I think the cosworth had uprated shocks chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 11th, 2006, 7:50pm matt hose if off and will be in post tuesday. cheers |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Matt on Sep 12th, 2006, 5:58pm many thanks mate matt :D |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by twinturbo on Sep 12th, 2006, 6:31pm Still after them engine parts if you decide to break it... TT |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 12th, 2006, 7:01pm At this stage either whole cars got to go or bits that leave it mobile and arnt to tricky to get off. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by twinturbo on Sep 12th, 2006, 8:02pm Well keep me informed.. Cams, Cam washers, Plenum and the V-Valley loom ( even if it's faulty ) is what I am after.. Tailgate popper solenoid too, Cheers TT |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 12th, 2006, 8:18pm got the tailgate solenoid, if it's the bit in the boot lid, would'nt be too much to post if you're interested in that. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by twinturbo on Sep 13th, 2006, 3:17pm Yeah the white thing. TT |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Zombie on Sep 13th, 2006, 5:35pm Got the load cover this morning! Finishes the boot off nice. Now I can hide stuff in said boot. Cheers Chaps! |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 13th, 2006, 6:13pm twin turbo I'm looking at the boot lid, is it the actual metal catch held by two torx you want or the mechanism inside the boot lid?? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by twinturbo on Sep 13th, 2006, 7:02pm Theres a solenoid, ABOUT 2" LONG, with a plunger that operates the boot latch. Has 2wires and is mounted to the INNER skin by two screws. TT |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 13th, 2006, 7:31pm Okay, I'll have alook when daylights back and let you know |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 14th, 2006, 5:55pm twinturbo pm sent re boot solenoid. chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Matt on Sep 14th, 2006, 6:13pm hi chaps hose arrived today, many thanks matt :) |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 14th, 2006, 8:17pm atlantic blue pm sent re window relays chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Matt on Sep 14th, 2006, 8:35pm me again, the cossie your breaking wouldnt happen to have the front fogs would it? i need the 2 relays that opperate them, one is behind the dash, just under the speedo/ rev clocks and the other is in the main fuse box matt |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 14th, 2006, 8:57pm Matt Yes,whats the best way to get to the one behind the dash any clues as to which relays they are ?any distinguishing marks numbers etc. chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Matt on Sep 14th, 2006, 9:14pm hi chaps http://www.fordscorpio.co.uk/images/handbook132.gif relay r9 (i think it's brown) on the above link and r35 (white) on the link below http://www.fordscorpio.co.uk/images/handbook134.gif i think you would have to remove the walnut dash to get to the latter |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 16th, 2006, 1:42pm Matt pm sent re parts are ready chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 16th, 2006, 3:54pm atlantic blue, door window relays will be in post on monday cheers chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Atlantic_blue on Sep 16th, 2006, 7:40pm Cheers chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by conoflex on Sep 17th, 2006, 4:23pm Hi, Have you got the N/S rear light unit please. Andy |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 17th, 2006, 8:28pm yes , lights in good condition pm sent chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 19th, 2006, 4:52pm conoflex thanks for pm, pm sent re bumper chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 19th, 2006, 4:53pm matt parts in post today. cheers chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by tintin on Sep 20th, 2006, 4:52pm pm sent... |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by bridgdav on Sep 22nd, 2006, 10:56am I'm looking for a RAD... after mine decided to dump all its contents on the road this morning...! Any ideas... is it a big job..? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 22nd, 2006, 5:33pm I've got a rad pm sent. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 24th, 2006, 8:23am bridgdav, just wondered if you are still interested in the radiator, I can get it off the car today if you require it, let me either way thanks Chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by bridgdav on Sep 24th, 2006, 6:16pm HI chaps.. just Won one on Ebay for £55 or so... Your P/mails didn't get through....? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 25th, 2006, 7:36am Bridgdav thanks for letting me know, glad you got one, theres a spare rad here if anyone else needs one. £25 plus p&p. chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 27th, 2006, 6:24pm gremlin1974 there's a pm re audio unit 7000 pm me if interested |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by bridgdav on Sep 30th, 2006, 10:07am Chaps... Looks like I'll need that RAD afterall... one I've got seems to be a 12V... no outlet for the expansion tank from the top of the rad. :'( The Cars on the ramps..! Cheers Dave |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Sep 30th, 2006, 1:41pm It's still available, I'll get it off and weigh it in for postage so it's£25 plus the p and p. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Oct 2nd, 2006, 4:28pm bridgdav The Rads in the post today goodluck with install chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by bridgdav on Oct 2nd, 2006, 4:40pm Cheers Chaps... Off to Dallas on Friday.. I'll see if I get time or the weather before then. otherwise a couple of weeks away. Dave |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Oct 8th, 2006, 4:20pm The wiper switch is ready for posting cheers chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by stedm747 on Oct 17th, 2006, 5:38pm hi chaps what couler is your estate and do you still have bonnet laquers gone on mine looks dreadfull :-/ |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Oct 18th, 2001, 6:44pm It's nouvour red (not sure about the spelling) but it's in good nick if you are interested. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Oct 29th, 2006, 9:36am pete snr getting egr components off car today chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Nov 18th, 2006, 11:25am Alloys and tyres now gone anyone interested in anything else as will need to go to scrap yard soon. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by kimi on Nov 20th, 2006, 8:46pm Chaps, Have you sold the Engine Wireing Loom Yet ? If not I would like to buy it please, it does not matter if it's started to break up as I want to use the plugs etc to build a new loom .....Kimi.... |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Nov 20th, 2006, 10:25pm kimi the loom is still there , its insulation is virtually non existant. I can't get access to the connectors on the gear box but if you dont mind it being cut I'll get off what I can and post to you at cost of p&p. Is that okay? Chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by kimi on Nov 21st, 2006, 1:59am Yes please, that would be great. If you have time could you try to cut it as far down the back of the engine/bulkhead as you can.thankyou. Ps. do you want a cheque or do you use PayPal ? Thanks again... Kimi... |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by stedm747 on Nov 21st, 2006, 12:37pm hi chaps how about the intierior auto dipping mirror is it still avail ? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Nov 21st, 2006, 5:35pm there's a dipping mirror but it dosent dip!! looks good, dosent leak and it hasn't gone brown. let me know if still interested.!! chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Nov 21st, 2006, 5:36pm kimi I'll have a look at the weekend , and let you know how much when I've weiged it for posting. paypal would be fine chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by kimi on Nov 21st, 2006, 9:16pm Thats smashing thanks, contact me on " kimi@itz3.net " |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by stedm747 on Nov 22nd, 2006, 2:29pm re mirror thanks chaps but it sounds like mine so no point thanks anyway |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Nov 25th, 2006, 9:06am Kimi, the engine end of the loom is off, email sent. chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by DJWerkz on Nov 25th, 2006, 10:30am How is the exhaust system and CAT's? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Nov 25th, 2006, 12:17pm the exhaust is a bit rusted through but there are two virtually new lambda sensors if you're interested chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by DJWerkz on Nov 25th, 2006, 11:08pm How much for both sensors? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by twinturbo on Nov 25th, 2006, 11:19pm Have you still got the rear calipers and disks? TT |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Nov 26th, 2006, 8:54am twinturbo, sorry no rear discs / callipers I do have a fairly new pr of front discs if you are interested in those. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Nov 26th, 2006, 8:59am djwerkz have both sensors pm sent chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by bridgdav on Nov 29th, 2006, 5:51pm Hi Chaps... Fitted the RAD this evening.. Only just got back from a China trip for 5 weeks..! All working well as far as I can tell..! Do you still have the rear wiper arm.. Mines broken..? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Nov 29th, 2006, 7:47pm bridgdave glad about the rad, got the rear wiper arm ,pm sent. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by tintin on Dec 3rd, 2006, 6:12pm hi did dj take the sensors? im in the market.... cheers |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Dec 4th, 2006, 11:18am I've still got the sensors at the moment, but expecting payment to arrive. If nothing happens will let you know, I'll try and find out whats going on Chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Dec 6th, 2006, 11:36am tintin, sorry mate DJ paid for the sensors, anything else you might want that I might have?? chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by tintin on Dec 7th, 2006, 8:23pm a reliable, rust-free, economic cosworth for under £300? ;D ;D ;D |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Dec 7th, 2006, 8:43pm I did have one but it broke down!!!!! |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by esex_tony on Dec 9th, 2006, 12:54pm do you have the alternator and how much do you want for it |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Dec 10th, 2006, 11:09am esex tony yes I have the alternator, pm sent chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Dec 23rd, 2006, 3:03pm Hello all lots of bits and pieces still to go so send a quick reply , email or pm if you need anything. Wish you all a happy christmas Chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by John_V on Dec 29th, 2006, 5:06pm on 08/05/06 at 09:00:07, chaps987 wrote:
Can you say if you still have the diff? Any idea of a price and would you be able to drop it in a box and slap some tape on it?? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Dec 29th, 2006, 5:58pm Sorry I need the car mobile, unless you want the whole car?? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by purple-rocket on Dec 30th, 2006, 11:32pm hi Chaps, do you still have the rear wash wipe motor? if so how much? Paul |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Dec 31st, 2006, 9:52am Hi Paul sorry already gone. chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by purple-rocket on Dec 31st, 2006, 12:55pm ok thanks anyway |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by purple-rocket on Jan 5th, 2007, 10:04pm wickedteen you have a rearwashwipe?? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by scorpio_man on Jan 7th, 2007, 9:59am hi there some posts have been moved to the correct place for wickedteen. regards andrew (mods) |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by wickedteen on Jan 7th, 2007, 11:40am sorry about that all |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by youmitegetian on Jan 7th, 2007, 11:08pm Hi, i'm after the cover that goes over the wiring at the back of the headlights, both sides? and also the panel that sits under the glove box to cover the module etc in the passenger footwell?? and whatever it is that covers the cd multichanger? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Jan 8th, 2007, 3:13pm youmitegetian Hi I,ve got the cd cover and the two headlight covers (these are about 7x4 inches and clip onto the back of each light covering the bulb housing got a number on them "PP-GF-30" hopefully thats the right thing. As for the cover in the footwell under the glove box, I think this may be just a piece of carpet clipped inplace - not sure as that side of the car interior is very dismantled!!, I'll have the carpet somewhere if you want that. If you could confirm what you want and I'll sort out a price inc P&p cheers chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by youmitegetian on Jan 8th, 2007, 7:02pm Hi mate, yeah sounds like the parts i need how much dya want?? |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Jan 8th, 2007, 7:54pm pm sent re parts chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Jan 12th, 2007, 4:48pm Pete are you still after the coolant hoses,? got them here if you want them , justlet me know cheers chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Scorpius on Jan 13th, 2007, 4:25pm Chaps. Any chance you still have the VSS (Vehicle Speed Sensor) attached to the gearbox? Thanks Ian |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Jan 14th, 2007, 8:34am Hello Scorpius sorry the vss has alreday gone. good luck chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Scorpius on Jan 14th, 2007, 5:36pm OK Thanks Ian |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Jan 28th, 2007, 10:37am The remains of this car has got to go to the breakers soon. if anyone wants anything get in touch. cheers chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Feb 6th, 2007, 6:36pm Pete Hoses are in the post today chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Feb 25th, 2007, 7:38am Bob, Light switch will be in Mondays post good luck chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by mzziaz on Feb 25th, 2007, 9:39am I'm looking for: * the lens for the left front light. * a new key mechanism for the rear lock (including keys, of course.) * rear bumper, preferably olive green. Please drop me an email at kjolmoen (at) gmail.com if you have any of those parts to sell. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Feb 25th, 2007, 10:27am e mail sent chaps |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Cosray - The Hague - Holland on Oct 9th, 2007, 2:49pm Would you have this supportbracket for the two downpipes left? Here's the drawing; it part # 6 with the FINIScodes: http://groups.msn.com/TheFordScorpio1995/scorpiocosworthonnoirmoutier.msnw?action=ShowPhoto&PhotoID=963 Looking forward, Ray |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by chaps on Oct 9th, 2007, 2:59pm Sorry this car has gone off to the scrap yard, no parts left now.. |
||
|
Title: Re: Breaking 2.9 cosworth estate 1996 Post by Cosray - The Hague - Holland on Oct 9th, 2007, 4:28pm That's a pity - hope she served you well! Ray |
||
|
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |