|
||
Title: breaking 2.9 12v Post by ricky on Apr 14th, 2007, 9:21am hi im breaking my 2.9 12v green ultma estate , most bits aviable and all in very good condition, except passenger side doors and bumpers, tan cloth int 7000,radio any parts req let me know regards rich ps in essex |
||
Title: Re: breaking 2.9 12v Post by wayne on Apr 14th, 2007, 4:02pm Hi Rich., Is the interior mirror in good condition? Would be nice to have one I could see out of... :) |
||
Title: Re: breaking 2.9 12v Post by wayne on Apr 14th, 2007, 10:11pm Just discovered I've lost my rear offside mudflap :( Would the estate version fit a saloon I wonder? Any chance yours is available? Cheers, Wayne. |
||
Title: Re: breaking 2.9 12v Post by wayne on Apr 14th, 2007, 10:35pm Scratch that last request -- Just been informed the estates are different :'( |
||
Title: Re: breaking 2.9 12v Post by Tompion on Apr 14th, 2007, 11:51pm Hi Do you have a good front passenger & drivers door aperture seal? That's the seal that goes around the door aperture that the door seals to, it has a bit of pumice trim moulded to it. Dave |
||
Title: Re: breaking 2.9 12v Post by ricky on Apr 15th, 2007, 7:09am yep got thempm sent ta |
||
Title: Re: breaking 2.9 12v Post by Tompion on Apr 15th, 2007, 4:27pm on 04/15/07 at 07:09:20, ricky wrote:
Hi Rick Thanks pm sent Dave |
||
Title: Re: breaking 2.9 12v Post by josswallace on Apr 16th, 2007, 10:54am What was the registration date of your motor. I am having terrible difficulty with a faulty arcon dashbord module and SATc unit. . |
||
Title: Re: breaking 2.9 12v Post by ricky on Apr 16th, 2007, 5:55pm hi its 96 on an n plate regards rick |
||
Title: Re: breaking 2.9 12v Post by Tompion on Apr 17th, 2007, 3:58pm Rick Thanks for dropping off the seals, sorry I wasn’t back in time to meet you. Both fitted now – should be a lot quieter with some decent ones on. Dave |
||
Title: Re: breaking 2.9 12v Post by josswallace on Apr 17th, 2007, 7:45pm Rick Do you have the air con dash booard control unit and the SATC (temperature control) unit, and was it all working OK including the re-set procedure. IF so I would beinterested if you could let me have a price. Thanks........Ian Wallace (ian@josswallace.co.uk) |
||
Title: Re: breaking 2.9 12v Post by ricky on Apr 18th, 2007, 4:44pm hi yes i have all the air con bits and they are all in perfect order never did a reset never needed to as for the price i dont have any idea what they go for do you ? regards rick |
||
Title: Re: breaking 2.9 12v Post by ricky on Apr 22nd, 2007, 5:24pm headlights, rear lights, modules, ect all still aviable at very good prices, loads of bits |
||
Title: Re: breaking 2.9 12v Post by bridgdav on May 10th, 2007, 4:11pm Rear Shocks..? Self levelling..? |
||
Title: Re: breaking 2.9 12v Post by adowds on May 10th, 2007, 6:04pm I think the_boogeyman has some shocks. Check his posts? EDIT looks like they've gone now actually. |
||
Title: Re: breaking 2.9 12v Post by smudgefood on May 10th, 2007, 10:19pm Hi I look for a drivers side headlight for a 1998 Scorpio estate can you help |
||
Title: Re: breaking 2.9 12v Post by victim on May 14th, 2007, 8:18am I am after the powersteering pump and pipe (that goes between the pump and rack). Also may be interested in the lower timing chain sprocket and spacer washer and CPS and bracket and possibly the powersteering pump bracket itself. I'm assuming it uses the later powersteering pump design for the engine with the rectangular remote reservoir.. that reminds me I'm also interested in the pressed steel bracket that the reservoir mounts with. |
||
Title: Re: breaking 2.9 12v Post by michellereece on Jun 1st, 2007, 5:15pm will the ecu be the same as the gear if so how much for ecu and map sensor thanks ;D |
||
Title: Re: breaking 2.9 12v Post by Swarfmaker on Jun 3rd, 2007, 5:30pm I'd be interested in a headunit to CD Multichanger lead if it could be stripped out of the loom. Regards Iain |
||
Title: Re: breaking 2.9 12v Post by ricky on Jun 4th, 2007, 4:10pm sorry mate but its gone |
||
Title: Re: breaking 2.9 12v Post by scorpio_man on Jun 4th, 2007, 5:43pm on 06/04/07 at 16:10:47, ricky wrote:
hi ricky are you saying the car is gone or just some parts? if it's the car, i'll lock this thread. let me know. andrew forum admin team |
||
Title: Re: breaking 2.9 12v Post by ricky on Jun 5th, 2007, 4:40pm thanks, still got , headlights, ecu, hbc and module, all air con bits , alternator , starter, dash, 7000 head unit, cd player, too many bits to mention |
||
Title: Re: breaking 2.9 12v Post by LanaK on Jun 5th, 2007, 6:06pm Hi, how's your cat? Mine has shattered, I'm told yours would fit! If you still have, please hint price etc. - MOT overdue. Tanx! |
||
Title: Re: breaking 2.9 12v Post by Big_Green_Tank on Jun 7th, 2007, 4:18pm Has it still got the passenger rear brake caliper? I assume it had vented disks?? Regards Bob |
||
Title: Re: breaking 2.9 12v Post by jaysea on Jun 7th, 2007, 11:49pm Hi, would be interested in 7000 headunit, do you have the code with it?. How much you looking for it inc postage. Cheers |
||
Title: Re: breaking 2.9 12v Post by ricky on Jun 8th, 2007, 5:54pm hi yes got headunit pm sent |
||
Title: Re: breaking 2.9 12v Post by simon950 on Jun 10th, 2007, 10:37pm How much for the HBC? |
||
Title: Re: breaking 2.9 12v Post by bigstu on Jun 14th, 2007, 5:22pm HI ...NEED ENGINE WIRING LOOM FOR A 2.9 AUTO 12V.GOES FROM O/SIDE INNER WING TO DIZZY AND DOWN TO BOX. COULD YOU HELP PLEASE THANKS STUART :) |
||
Title: Re: breaking 2.9 12v Post by ricky on Jun 14th, 2007, 8:03pm hi sorry no chance, been to fords and they quoted £1,495.00 plus vat and they have been discontinued for over 3 years , yes thats right i think they are quoting for the whole engine/front car wiring loom not just the engine loom or perhaps thats for a new car ,i can not understand why they cant understand what an engine wiring loom is |
||
Title: Re: breaking 2.9 12v Post by kyanther on Jun 22nd, 2007, 10:40am do you have a manual gearbox? please |
||
Title: Re: breaking 2.9 12v Post by bigstu on Jun 26th, 2007, 6:01pm hi rich would you have engine wiring loom.it runs from o/side inner wing to engine and down to gear box.mines an auto.hears hoping stu |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |