Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Parts For Sale >> Cosworth 24v 2.9 V6 Scorpio parts
(Message started by: galahad on Jul 1st, 2007, 6:51pm)

Title: Cosworth 24v 2.9 V6 Scorpio parts
Post by galahad on Jul 1st, 2007, 6:51pm
Hello folks, I bought a Cosworth 24v 2.9 V6 Scorpio on a R reg for bits for a 2.0 16v P reg Scorpio that was too good to scrap, but a lot of it was of no use to me.

I have for sale: Complete engine, 136,000 miles, comes with: torque converter, alternator, aircon compressor, starter, throttle cable (and box that connects to it), ECU, wiring loom, subframe, airbox, air flow meter, key, transponder.

Engine is good, no taps or rattles, wanting close to £200 for the lot, pickup only.

Also have the headlights.  

Rear Diff is sold, and the leather, sunroof, wheels and running gear are all going onto the other Scorpio.

I'm in Radstock (near Bath, BA3 postcode)

If no interest here, it will go onto Ebay.

Title: Re: Cosworth 24v 2.9 V6 Scorpio parts
Post by galahad on Jul 3rd, 2007, 7:36am
Is there really no interest in this?

Title: Re: Cosworth 24v 2.9 V6 Scorpio parts
Post by Scorpius on Jul 3rd, 2007, 8:45am
I am after a Cosworth Radiator. Its not the same as the 2.0/2.3 rad

Ian

Title: Re: Cosworth 24v 2.9 V6 Scorpio parts
Post by galahad on Jul 3rd, 2007, 11:46am
Sorry, radiator has already gone, not surprised, Ford wanted the best part of £230 for one!  :o

Title: Re: Cosworth 24v 2.9 V6 Scorpio parts
Post by galahad on Jul 3rd, 2007, 3:28pm
SOLD :)

Title: Re: Cosworth 24v 2.9 V6 Scorpio parts
Post by galahad on Jul 5th, 2007, 10:17pm
Headlights now SOLD

Title: Re: Cosworth 24v 2.9 V6 Scorpio parts
Post by GeraldineGreene on Jul 6th, 2007, 9:19pm
Hi ya
Just a quick note to say many thanks Galahad for the engine and headlights. Nice doing business with you. We have a busy weekend ahead now!
Ania

Title: Re: Cosworth 24v 2.9 V6 Scorpio parts
Post by gerryw on Aug 16th, 2007, 5:30pm
Hiya
I need the full wiper linkage excluding the wiper motor, if it will fit my '97' Cossie?

If it does and you have it, how much do you want  including postage and if all is OK when can you post it?

Cheers
Gerryw

Title: Re: Cosworth 24v 2.9 V6 Scorpio parts
Post by Cosray - The Hague - Holland on Oct 9th, 2007, 2:41pm
Would you have this supportbracket for the two downpipes left?
Here's the drawing; it part # 6 with the FINIScodes:
http://groups.msn.com/TheFordScorpio1995/scorpiocosworthonnoirmoutier.msnw?action=ShowPhoto&PhotoID=963
Looking forward,
Ray



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.