|
||
Title: breaking lpg 24v cosworth Post by jj7701 on Nov 24th, 2007, 9:24am im am now starting to break my 24v cosworth nearly all parts avalible. its a N 95 and was working perfect apart from the engine loom. i also have the remote key fobs etc. message me if you need any parts etc cheers james |
||
Title: Re: breaking lpg 24v cosworth Post by yangi on Nov 29th, 2007, 9:29pm Hi James Only thing I'm looking for at moment is Temp Gauge sender. The single wired copper probe that sits in the alloy housing (on r/h side of housing as viewed from front) above the water pump. Has 12mm (??) nut and a rubber boot on exposed end. Cheers Yangi |
||
Title: Re: breaking lpg 24v cosworth Post by jj7701 on Dec 1st, 2007, 1:23am i will have a look tomorrow (sat) and let you know cheers james |
||
Title: Re: breaking lpg 24v cosworth Post by r33per on Dec 1st, 2007, 10:39pm James, Saloon or estate? Stu |
||
Title: Re: breaking lpg 24v cosworth Post by jj7701 on Dec 2nd, 2007, 3:34am its a saloon and a ultima |
||
Title: Re: breaking lpg 24v cosworth Post by r33per on Dec 2nd, 2007, 2:50pm Cool. Assuming it is also a pre-facelift, I'm interested in the front bumper and both offside front light clusters. Stu |
||
Title: Re: breaking lpg 24v cosworth Post by yangi on Dec 2nd, 2007, 6:46pm on 11/29/07 at 21:29:55, yangi wrote:
Any joy with the sender James? Cheers Yangi |
||
Title: Re: breaking lpg 24v cosworth Post by jj7701 on Dec 4th, 2007, 12:47pm yeah i think i have it i msg you. if ya give me your addy i will send it to you. dunno what its worth see if its the correct one 1st. |
||
Title: Re: breaking lpg 24v cosworth Post by jj7701 on Dec 4th, 2007, 12:50pm stu it is pre face lift but the front bumper has a very small crack in it but the light clusters are ok. msg if you are intrested james |
||
Title: Re: breaking lpg 24v cosworth Post by r33per on Dec 5th, 2007, 12:01pm PM sent. |
||
Title: Re: breaking lpg 24v cosworth Post by twinturbo on Dec 8th, 2007, 8:56pm What's the LPG kit? Is it any good? TT |
||
Title: Re: breaking lpg 24v cosworth Post by Baz on Dec 8th, 2007, 9:06pm TT, the car is Steve Congraves old motor and it has the Romano sequential system on it just like mine!! ;D |
||
Title: Re: breaking lpg 24v cosworth Post by jj7701 on Dec 9th, 2007, 11:20am thats the one i still have the lpg system if anyone is intrested. pm me cheers james |
||
Title: Re: breaking lpg 24v cosworth Post by oldfartscorpio on Dec 11th, 2007, 10:18am Hello. I need a spare part for my aging scorpio. It is a control module that is situated in the drivers car door and is used to control the windows and elecreic seats. The unit has a part number: ELD P/N F5RF-13C791-AD (although in bigger print another number appears, 95GG-13C791-AD) with the name PROCS CNTL. DRVR - DOOR. Any chance that you have this spare?? |
||
Title: Re: breaking lpg 24v cosworth Post by jj7701 on Dec 11th, 2007, 12:49pm yes i prob have that part as i havent removed anything from inside yet email me on jj7701@hotmail.com i will let you know at the weekend if i have it etc. as i wont have time in the week cheers james |
||
Title: Re: breaking lpg 24v cosworth Post by fatman35 on Dec 16th, 2007, 10:57am Hi -where are you and how much for the wheels |
||
Title: Re: breaking lpg 24v cosworth Post by jj7701 on Dec 29th, 2007, 4:25pm i cant sell the wheels just yet as i wont beable to move the car. i will let you know as soon as i can sell them cheers james |
||
Title: Re: breaking lpg 24v cosworth Post by twinturbo on Dec 30th, 2007, 10:04pm How about the camshafts with timing wheels and disks ?? TT |
||
Title: Re: breaking lpg 24v cosworth Post by Dav3y on Jan 1st, 2008, 11:36am Do you have the HBC module from the aircon at all, and if so did your heater blower work perfectly ? Location is on here http://www.fordscorpio.co.uk/acindex.htm |
||
Title: Re: breaking lpg 24v cosworth Post by jj7701 on Jan 2nd, 2008, 5:41pm as far as i know everything was working ok and i still have the module email me jj7701@hotmail.com make me an offer |
||
Title: Re: breaking lpg 24v cosworth Post by mechcity on Jan 18th, 2008, 10:52pm On impulse and just for the crack I would be interested in the lpg system. Do you have any manuals/instalation info for it? What sort of price were you thinking? cliveslaptop@yahoo.co.uk |
||
Title: Re: breaking lpg 24v cosworth Post by mi_scorpio on Jan 19th, 2008, 12:22pm HI james do you know if the lpg system will convert to 2.3 16v or could be modified cheaply????? |
||
Title: Re: breaking lpg 24v cosworth Post by mi_scorpio on Jan 19th, 2008, 12:26pm have you still got the wheels? if you have I'm interested and will donate my old one's to propup the car, how much did you want for them ;D |
||
Title: Re: breaking lpg 24v cosworth Post by gameboy on Apr 6th, 2008, 8:19pm Hi how much do you want for the L.P.G conversion is it easly transferable. Thanks Dave |
||
Title: Re: breaking lpg 24v cosworth Post by markmills2000uk on Apr 23rd, 2008, 6:34pm do you still have the lpg system,im interested,is it lpg injection or is it a mixer on the air intake |
||
Title: Re: breaking lpg 24v cosworth Post by catalina on May 20th, 2008, 10:49pm Probably a bit late, but do you have the coolant thermostat. It sits behind the AC compressor. It looks like a small bottle trap, part No. 7334678. Some models use a conventional looking thermostat, no. 6588962, but this will not fit my car. Cheers John |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |