Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts For Sale >> Breaking 24v coswoth saloon
        
(Message started by: kittman on Dec 10^th, 2007, 9:21pm)

Title: Breaking 24v coswoth saloon
Post by kittman on Dec 10^th, 2007, 9:21pm

I have a 95 N cosworth saloon to break engine done 65k have taken a few bits off for my cossie so no radio cd changer or n/s front brake disks

Title: Re: Breaking 24v coswoth saloon
Post by oldfartscorpio on Dec 11^th, 2007, 10:16am

Hello. I need a spare part for my aging scorpio. It is a control module that is situated in the drivers car door and is used to control the windows and elecreic seats. The unit has a part number: ELD P/N F5RF-13C791-AD (although in bigger print another number appears, 95GG-13C791-AD) with the name PROCS CNTL. DRVR - DOOR. Any chance that you have this spare??
???

Title: Re: Breaking 24v coswoth saloon
Post by kittman on Dec 12^th, 2007, 6:05pm

I should have one on mine I will look tomorrow and try to take it off if its not to difficult

Title: Re: Breaking 24v coswoth saloon
Post by Highlander on Dec 12^th, 2007, 6:32pm

three screws and two multiplugs ;)

Title: Re: Breaking 24v coswoth saloon
Post by kittman on Dec 12^th, 2007, 6:35pm

on 12/12/07 at 18:32:14, Highlander wrote:

three screws and two multiplugs ;)

cheers

Title: Re: Breaking 24v coswoth saloon
Post by fatman35 on Dec 16^th, 2007, 10:55am

Hi - where are you and how much for the wheels

Title: Re: Breaking 24v coswoth saloon
Post by dan_the_man on Dec 17^th, 2007, 12:24am

hi where you at ? is there any noise when starting from cold ? what you after for the full engine , rad auto box and what else one may need. I guess you've got service history to back up the milage !

Title: Re: Breaking 24v coswoth saloon
Post by mi_scorpio on Feb 1^st, 2008, 8:51pm

Hi kittman have you still got the dif and bumpers? ;D

Title: Re: Breaking 24v coswoth saloon
Post by Chieftain on Feb 1^st, 2008, 10:05pm

Hi any chance of the connecting swivel on the side of the g/box that takes one link from the shift handle and another to the g/box?

Title: Re: Breaking 24v coswoth saloon
Post by Robiko on Feb 6^th, 2008, 9:24pm

Hi Kittman, I'm looking for a waterpump and a cc unit if you still have them available...

Title: Re: Breaking 24v coswoth saloon
Post by savvy on Feb 13^th, 2008, 9:47pm

I'm after two headlight washer jets (driver side and passenger side) if you have them?

Title: Re: Breaking 24v coswoth saloon
Post by Pete_M on Feb 13^th, 2008, 10:07pm

There are two on ebay....

Title: Re: Breaking 24v coswoth saloon
Post by savvy on Feb 16^th, 2008, 5:51pm

Do you mean these ones?
http://cgi.ebay.co.uk/Ford-Scorpio-95-Pair-of-headlamp-washers-and-covers-NOS_W0QQitemZ130197085216QQihZ003QQcategoryZ21654QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Mine's a facelift...

Title: Re: Breaking 24v coswoth saloon
Post by Nunnspoet on Feb 16^th, 2008, 6:35pm

Hi Kittman :)
I may be interested ::) in the leather seats and door cards depending on the colour and condition. My present ones are from an old Granada and are black and whilst they look quite good I could really do with an upgrade so to speak. Also where are you situated? You may be near enoug for me to pay a visit.

Mike N

Title: Re: Breaking 24v coswoth saloon
Post by josswallace on Feb 20^th, 2008, 6:41pm

I am looking for the two plastic heater vents that sit in the middle of the dash board if you still have them.

Ian Wallace

Title: Re: Breaking 24v coswoth saloon
Post by savvy on Feb 23^rd, 2008, 6:29pm

I need the dials for the heater controls (to make the fan speed fast or slow etc). Do you have these?

Title: Re: Breaking 24v coswoth saloon
Post by Bren on Mar 5^th, 2008, 5:57pm

Do you still have the heater matrix?

I knew I should have done this during the s_s_summer, wow it's cold in this motor :(

Title: Re: Breaking 24v coswoth saloon
Post by pipino on Jul 5^th, 2012, 11:25am

do you have the engine and gearbox wiring loom??

Title: Re: Breaking 24v coswoth saloon
Post by Mike H on Jul 5^th, 2012, 12:20pm

No new postings from Kittman for over 4 years

Title: Re: Breaking 24v coswoth saloon
Post by dave c on Jul 11^th, 2012, 7:23pm

Do you have the complete sunroof and motor mine has just given up

Title: Re: Breaking 24v coswoth saloon
Post by leewar on Jul 11^th, 2012, 8:27pm

Hi Dave, You should just need the motor :) See my email to you. Lee