Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts For Sale >> 2.3 ultima bits (NOW SCRAPPED)
        
(Message started by: kingjim on Apr 23^rd, 2008, 9:40pm)

Title: 2.3 ultima bits (NOW SCRAPPED)
Post by kingjim on Apr 23^rd, 2008, 9:40pm

breaking up my ultima,aint had it long then it died,every thing is their apart from passanger window and grille.Its a redish colour,S plate.I'm going back to my mk 3 so its all surplus to me.if u want any bits (can always upset the postie)make an offer.

Title: Re: 2.3 ultima bits
Post by bizzay1 on Apr 23^rd, 2008, 11:15pm

saloon or estate, facelift or pre ??

cheers

Title: Re: 2.3 ultima bits
Post by kingjim on Apr 27^th, 2008, 5:45pm

its a saloon,'97 on S.dont know what the difference between pre and post face lift is,only got it cos it were cheap hack. ;D

Title: Re: 2.3 ultima bits
Post by Scorpio_Mike on Apr 27^th, 2008, 7:45pm

What's wrong with it ? Rust / engine / gearbox ???

Title: Re: 2.3 ultima bits
Post by kingjim on Apr 27^th, 2008, 8:00pm

it just stopped,havn't looked into it 'cos mk3 cossie is back on the road,to be honest,it was a nice car to drive but d**n ugly to look at,it was a means to an end nowt more.

Title: Re: 2.3 ultima bits
Post by Savvy on May 13^th, 2008, 9:01am

Do you have a temp sender for a 2.3?

Title: Re: 2.3 ultima bits
Post by Scorpio_Mike on May 13^th, 2008, 10:27am

Got any washer jets ?
Heated ones if poss.

Title: Re: 2.3 ultima bits
Post by JimmyJaffa on May 13^th, 2008, 12:46pm

Hi have you got a key fob am very interested, also has it adjustable headlights as after o/s motor and does it have headlamp washers?

Title: Re: 2.3 ultima bits
Post by bizzay1 on May 16^th, 2008, 8:58pm

centre rear light strip and drivers side rear light cluster, if they are edged in black (facelift type) ??

Make that all 3 rear lights - noticed the other one is chipped >:( >:(

Title: Re: 2.3 ultima bits
Post by mi_scorpio on May 17^th, 2008, 7:47pm

Hi Mate have you still got the two bumpers? and the gear box?

Title: Re: 2.3 ultima bits
Post by kingjim on May 19^th, 2008, 5:11pm

lights are chrome stipped,back bumpers got a big hole in it and the front aint great either.gear box has gone.

Title: Re: 2.3 ultima bits
Post by JimmyJaffa on May 19^th, 2008, 9:45pm

have you got a headlight motor and the leveling switch and does it have headlight washers?

Title: Re: 2.3 ultima bits
Post by danny-mack on Jul 9^th, 2008, 10:12am

Hi, has it still got the wiring on top of the engine underneath the cover plate (fuel cut off wiring loom)?

Title: Re: 2.3 ultima bits
Post by gawsworthboy on Jul 9^th, 2008, 12:33pm

Hiya, I'm after a pair of good rear shockers....how much with post to Macclesfield....Cheers....Steve

Title: Re: 2.3 ultima bits
Post by caterex on Jul 10^th, 2008, 12:36pm

Rear wheels ABS speed sensors. how much including postage.
Thanks

Title: Re: 2.3 ultima bits
Post by Mike_Floutier on Jul 20^th, 2008, 8:42pm

Hi KingJim,

Is it an automatic? If so I'd be very interested in the prop-shaft.

THanks

Mike

Title: Re: 2.3 ultima bits
Post by manpx51 on Oct 22^nd, 2008, 12:35pm

hi Mike do you have the in-let maifold (plastic), if so how much please.

Title: Re: 2.3 ultima bits
Post by manpx51 on Oct 22^nd, 2008, 12:36pm

Manifold even.
Mike

Title: Re: 2.3 ultima bits
Post by Wadman on Oct 24^th, 2008, 10:43pm

Need one wheel 12 spoke 6.5 x 16 silver alloy, would you sell just this bit?

Wadman

Title: Re: 2.3 ultima bits
Post by supatall on Oct 26^th, 2008, 8:42pm

Hi

I might need the inlet manifold. Is this still available?

Simon

Title: Re: 2.3 ultima bits
Post by danny-mack on Jan 31^st, 2009, 12:14pm

Hi, is the wiring loom still available from the top of the engine (under the cover plate)?

Title: Re: 2.3 ultima bits
Post by squirrell25 on Feb 7^th, 2009, 2:40pm

hi
i need a inlet manifold. Is this still available?
thanks
rich

Title: Re: 2.3 ultima bits
Post by fredcogger on Feb 19^th, 2009, 2:51pm

Do you still have the radio?
Fredcogger

Title: Re: 2.3 ultima bits
Post by mi_scorpio on Mar 24^th, 2009, 10:14am

Hi kingjim I need outlet manifold, still got it? ;D

Title: Re: 2.3 ultima bits
Post by mi_scorpio on Mar 25^th, 2009, 12:34pm

Hi do you have the outlet manifold, how much, where are you located.

;D

Title: Re: 2.3 ultima bits
Post by Tompion on Mar 25^th, 2009, 5:43pm

This Thread is almost a year old - 23.04.08
His last reply was on 19.05.08

I assume this is the same car – now scrapped.
See thread:
http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=admin3;action=display;num=1210083358;start=12#12

Dave

Title: Re: 2.3 ultima bits
Post by scorpio_man on Mar 25^th, 2009, 6:45pm

hi there

topic now locked by admin. :)