|
||
Title: New 2.3 inlet manifold's Post by Stixy on Aug 24th, 2009, 3:04pm New 2.3 inlet manifolds complete with sensors tps injectors iscv thermostat etc ( not mine ) http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=170373361341&ssPageName=STRK:MEWNX:IT Bargain for £60 delivered mine has just arrived ;D |
||
Title: Re: New 2.3 inlet manifold's Post by Jonnycab on Aug 25th, 2009, 11:14am Well spotted Stixy ;),......I've just bought one myself :) Didn't realise they made a 2.3 Transit though :-/ P.S....I rang the seller to check the part number & it is the same as the Scorp manifold :) |
||
Title: Re: New 2.3 inlet manifold's Post by lesterlad on Aug 25th, 2009, 6:19pm Seller must have realised he's on to a good thing, he's re-listed another 5 and increased the price by £25 to £75. |
||
Title: Re: New 2.3 inlet manifold's Post by pinto on Aug 25th, 2009, 6:30pm on 08/25/09 at 11:14:08, Jonnycab wrote:
Still do :) Order yourself a sparkly new 09 plate petrol transit from Fords and pop your bonnet - welcome to scorp heaven ;) |
||
Title: Re: New 2.3 inlet manifold's Post by Jonnycab on Aug 26th, 2009, 12:14am Even at £75 a throw it's still a good deal. The manifold alone cost about £300 from Ford plus it's got all the hardware on it....Idle control valve, fuel pressure regulator, throttle, fuel rail & injectors, sensors, t-stat & EGR fitting. If you bought all that from Ford, I wouldn't imagine you'd get much change out of £700 :o I wonder where they get them from ? |
||
Title: Re: New 2.3 inlet manifold's Post by Stixy on Aug 26th, 2009, 10:02am There selling coil packs too |
||
Title: Re: New 2.3 inlet manifold's Post by Tompion on Aug 26th, 2009, 1:01pm What a bargain couldn’t resist it for the injectors alone (hope they’re the same – the rail is the same number) grabbed the last £60 one. It arrived this morning cocooned in its Ford box. The Idle control valve has the wrong plug but haven’t noticed any other differences. I also notice they’ve altered the stat cover so you can’t put the stat in against the flow. Just off to bin the packing foam – the fumes coming off have filled the house. |
||
Title: Re: New 2.3 inlet manifold's Post by Jonnycab on Aug 26th, 2009, 5:03pm Got mine today as well...both of them ;D....not being greedy, the other ones for a mate :) Apart from the IACV having the wrong plug the only other thing I notice is the throttle cable linkage is totally different, but for £60 apiece, who's complaining :D |
||
Title: Re: New 2.3 inlet manifold's Post by gost on Aug 26th, 2009, 6:14pm cant find othere listing lesterlad?? |
||
Title: Re: New 2.3 inlet manifold's Post by lesterlad on Aug 26th, 2009, 6:19pm on 08/26/09 at 18:14:13, gost wrote:
Here ya go gost 5 available Ends 24 Sep, @ 14:00 http://cgi.ebay.co.uk/NEW-TRANSIT-2-3-PETROL-COMPLETE-MANIFOLD_W0QQitemZ170375743604QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item27ab2f8874&_trksid=p4634.c0.m14.l1262 |
||
Title: Re: New 2.3 inlet manifold's Post by - Mike - on Aug 26th, 2009, 9:10pm Are these the same as the 2.3 Galaxy ones ??? |
||
Title: Re: New 2.3 inlet manifold's Post by Jonnycab on Aug 27th, 2009, 12:32am on 08/26/09 at 21:10:15, - Mike - wrote:
Yes, but unlike the Galaxy ones, they have the sensor fittings & the t-stat cover fittings (as the Scorp does)....they even have the two sensors & t-stat (usually £17 each from Ford) pre-fitted as well :) Edit.....the temp guage sender has a different plug fitting ::) |
||
Title: Re: New 2.3 inlet manifold's Post by gost on Aug 27th, 2009, 5:42pm thanks lesterlad |
||
Title: Re: New 2.3 inlet manifold's Post by Tompion on Aug 30th, 2009, 4:04pm Today I transferred the new injectors & rail, fuel pressure regulator, throttle body & the internal egr pipe. The throttle body only needed the plastic part that the cables go to swapping over. I noticed the EGR pipe doesn’t vent under the idle control valve like the Scorpio one, which is why I changed it – I wondered if the idle control valve may stay cleaner. I also fitted the idle control valve after chopping the socket about to fit the Scorpio plug. Too early to say if it’s had any effect but running & driving fine. http://i.imgur.com/ohuOj7U.jpg |
||
Title: Re: New 2.3 inlet manifold's Post by wojtekor on Aug 31st, 2009, 5:45pm I'll buy one next week I guess ;) or maybe 2 just in case :) |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |