Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts For Sale >> 2.0 16v auto Ultima saloon
        
(Message started by: Highlander on Nov 8^th, 2009, 3:57pm)

Title: 2.0 16v auto Ultima saloon
Post by Highlander on Nov 8^th, 2009, 3:57pm

Breaking the one I bought from Benza which was used for driving round the fields in the summertime ;D

Not much left bodywork wise and i've pinched the diff but pretty much everything else available if anyone needs anything.

Engine runs fine but has a tappety tick somehwere in the head so not recommended..

http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=cars;action=display;num=1248703721;start=15#15

p.s. its still mot'd till next June! ;D

Title: Re: 2.0 16v auto Ultima saloon
Post by 10mpg on Nov 11^th, 2009, 9:38am

ohhh do you have the metal inlet manifold?

Title: Re: 2.0 16v auto Ultima saloon
Post by Highlander on Nov 11^th, 2009, 9:55am

Sure do, its still running, just the whole manifold with everything on it?

Title: Re: 2.0 16v auto Ultima saloon
Post by 10mpg on Nov 11^th, 2009, 6:37pm

er well everything i would need to retrofit it to my 2.3 (as I'm sick of cracking the plastic ones) I'm not sure which bits will transfer across, so unless you know? i'd hope most of it was transferable, but might be wise to keep anything we're not sure about attached!

Title: Re: 2.0 16v auto Ultima saloon
Post by Highlander on Nov 11^th, 2009, 6:54pm

Ok, will see if i can get it off Saturday for you, i'm moving into my new house on Monday but hopefully i can squeeze it in ;)

pm me your address

Title: Re: 2.0 16v auto Ultima saloon
Post by 10mpg on Nov 11^th, 2009, 10:10pm

PM sent! :)

Title: Re: 2.0 16v auto Ultima saloon
Post by Chris_Basel on Nov 13^th, 2009, 11:27am

Does it have decent exhaust manifold?

I took the heat shield off mine the other day to investigate an exhaust leak and the manifold is almost broken in two pieces.

No rush for it, by the way.

Thanks,
Chris

Title: Re: 2.0 16v auto Ultima saloon
Post by Highlander on Nov 13^th, 2009, 11:40am

Hi Chris,

it does but I have another exhaust manifold spare anyway which is off the car.

PM me your details, the usual £1 million inc delivery ok? ;D

Title: Re: 2.0 16v auto Ultima saloon
Post by PJDavis on Nov 14^th, 2009, 11:35am

Could I just ask if the 2.0lt exhaust manifold is the same as the 2.3lt? Thanks.

Title: Re: 2.0 16v auto Ultima saloon
Post by Highlander on Nov 14^th, 2009, 12:10pm

yep they are

Title: Re: 2.0 16v auto Ultima saloon
Post by PJDavis on Nov 18^th, 2009, 6:30pm

Thanks very much Highlander, that's something else I can salvage off my 2.0lt engine! :D

Title: Re: 2.0 16v auto Ultima saloon
Post by pinto on Nov 18^th, 2009, 6:39pm

on 11/13/09 at 11:40:02, Highlander wrote:

PM me your details, the usual £1 million inc delivery ok? ;D

When did you change your name to Spike ? :P ;D

Still looking for those leather seat uprights.....but postage could be troublesome :-/

Title: Re: 2.0 16v auto Ultima saloon
Post by nighthawk on Nov 21^st, 2009, 1:33pm

hi do you have the return pipe that goes into the fuel tank the one with the red ends also the fuel cut off loom that runs around the engine

Title: Re: 2.0 16v auto Ultima saloon
Post by Highlander on Nov 26^th, 2009, 2:59pm

the loom has had some repairs done in the past by the looks of it, round the camshaft sensor and the rear of the cam cover area and could probably do with these areas redoing but its working ok.

Fuel pipe i should have too

Title: Re: 2.0 16v auto Ultima saloon
Post by Matt on Dec 6^th, 2009, 4:54pm

was it a manual? if so i need the brake servo, or at least the master cylinder and the rod that connects to the brake pedal

;D

Title: Re: 2.0 16v auto Ultima saloon
Post by Highlander on Dec 7^th, 2009, 10:47am

Auto Matt,

I should have put that in the title maybe! }{