Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts For Sale >> Parts
        
(Message started by: Highlander on Jul 5^th, 2010, 11:44pm)

Title: Parts
Post by Highlander on Jul 5^th, 2010, 11:44pm

I'm sure i've forgotten about a couple of parts I was going to post out for people.

i think I have everything in the last couple of weeks either posted or in the process or posting but if you're expecting something from before then give me a shout to make sure.

I'm still moving all my cars to the new shed at the minute and I'm a disaster area! ;D

I've definitely posted or about to post stuff to the following :

Tony
Stixy
Tiggerlit
PedroPedro
Bobbit
lpmurphy
steve_500uk
Dave2302/PJDavis personal delivery soon! ;)

Title: Re: Parts
Post by joe-satch on Jul 6^th, 2010, 6:46am

did you forget the rubber propshaft coupling from the 2.0ltr you was breaking,i wanted to replace the hex type to the round type on my mk3..;-)

Title: Re: Parts
Post by Highlander on Jul 6^th, 2010, 9:40am

Yep! that was one of them!

I promised you that about 5 years ago! ;)

Title: Re: Parts
Post by joe-satch on Jul 6^th, 2010, 1:12pm

thats about right stu...;-).

Title: Re: Parts
Post by PJDavis on Jul 6^th, 2010, 4:28pm

I'm away on Holiday this Friday evening for a week. Try not to come North till I'm back! I'm away again weekend of the 23rd, and then away for a week from the 30th.

Hth.

Peter

Title: Re: Parts
Post by PJDavis on Jul 6^th, 2010, 4:34pm

By the way Stuart, the Gal has asked me when, "I'm moving that bloody engine?" Remember it's a brand-new 2.0ltr. What I'm going to do is strip the manifolds off along with the cylinder head, water-pump, leaving the block and it's innards along with the clutch. The clutch looks new, although the pressure plate has surface rust which would easily sand-blast off. Actually I might take it off and sand-blast it. Make sure you've enough room to take the block away, and enough strength to help me lift it!

Pete

Title: Re: Parts
Post by Stixy on Jul 7^th, 2010, 7:01pm

on 07/05/10 at 23:44:15, Highlander wrote:

I'm sure i've forgotten about a couple of parts I was going to post out for people.

Stixy

Arrived today :) thanks again

Title: Re: Parts
Post by tonyboy on Jul 7^th, 2010, 8:45pm

Got my bit with thanks
Cheers

Title: Re: Parts
Post by joe-satch on Jul 8^th, 2010, 7:49am

i bet im going to be last...;-)..

Title: Re: Parts
Post by Tons_of_fun on Jul 8^th, 2010, 7:56am

Dont forget my VERY LARGE package Stuart ;-) :-) :-) :-)

Title: Re: Parts
Post by Highlander on Jul 8^th, 2010, 9:16am

on 07/08/10 at 07:49:48, joe-satch wrote:

i bet im going to be last...;-)..

rubber donut for an auto?

Title: Re: Parts
Post by joe-satch on Jul 8^th, 2010, 9:28am

yes please..but it needs to be from a 2.0ltr or 2.3..not cosworth...as i understand it wont fit...the round couplings are far better than the hex type that break up are a few years...and as i understand will fit the mk3 scorpio.;-)..thank you stu.

Title: Re: Parts
Post by Highlander on Jul 8^th, 2010, 9:30am

Yep its on a 2 litre ;)

Title: Re: Parts
Post by joe-satch on Jul 8^th, 2010, 9:48am

ok stu,whenever your ready....we can get our heads together..;-)

Title: Re: Parts
Post by gizardpew on Aug 14^th, 2010, 9:47pm

Hi I'm looking for a full set of locks & keys the red one to be included for my 98 scorpio can you help?if yes could you let me have your price. my email address is gizardpew@yahoo.com regards Dave Murphy