Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts For Sale >> Breaking 1997 24V Ultima Estate
        
(Message started by: Tono on Aug 26^th, 2010, 4:46pm)

Title: Breaking 1997 24V Ultima Estate
Post by Tono on Aug 26^th, 2010, 4:46pm

Im breaking a 1997 24V Ultima Estate in Pepper Red.

http://i2.photobucket.com/albums/y3/tono300/Scorpio/IMAG1367.jpg
http://i2.photobucket.com/albums/y3/tono300/Scorpio/IMAG1331.jpg

Everything is available except the engine/gearbox

The car is very clean and has the 12 spoke alloys, 3 of which have excellent tyres.

Nice leather interior.
Tonneau cover in excellent condition.

Im located in Medway, Kent.

Tony :)

Title: Re: Breaking 1997 24V Ultima Estate
Post by tonyboy on Aug 26^th, 2010, 10:33pm

Looks too good to break......... and wellcome to the site........

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Aug 27^th, 2010, 2:12pm

Hi Tonyboy, thanks for the welcome.

Apart from the rear arches and bottom of the tailgate, the car is too good to break although it needs work for an mot i think. The puropse of buying the car was for it to provide engine/box for my Police Car and use as a short term runner until the MOT/Tax runs out (Aug 31) and Id sourced a new everyday family car.

The price I paid for the car was a steal given how much Id have to fork out for a 2nd hand bob engine. Breaking the car will just bring in a few funds off the price of the car and provide me with all the vital parts I want for the Cop Car.

Title: Re: Breaking 1997 24V Ultima Estate
Post by lleewar on Aug 28^th, 2010, 1:40am

Hi Tono, firstly welcome to the site for the best info and help you could want for your scorpio. Secondly, how much for the wheels and would you have the passenger seat loom to work the electric seat please. Regards Lee

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Aug 29^th, 2010, 2:00pm

Hi Lee,

Thanks for the welcome.

Wheels are £110 ono

The passenger seat loom is all comeplete and in the car. I dont need it for my Police car. How much of the loom do you require?

Here are the wheels. The second photo shows the worst one. Its flaky paint as opposed to corrosion/kerbing.
http://i2.photobucket.com/albums/y3/tono300/Scorpio/DSCF3049.jpg

http://i2.photobucket.com/albums/y3/tono300/Scorpio/DSCF3050.jpg

http://i2.photobucket.com/albums/y3/tono300/Scorpio/DSCF3051.jpg

http://i2.photobucket.com/albums/y3/tono300/Scorpio/DSCF3053.jpg

Title: Re: Breaking 1997 24V Ultima Estate
Post by lleewar on Aug 29^th, 2010, 6:03pm

Hi Tony, Wheels are nice but at the moment too rich for me in unemployment terms. Regarding the passenger seat loom, I need whatever it takes to get the passenger seat to move from the seat to wherever it goes !!! Regards Lee

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Aug 29^th, 2010, 6:52pm

on 08/29/10 at 18:03:35, lleewar wrote:

Lee, do you know where the loom travels too and if there is a multiplug that just unplugs somewhere further up the loom.

Ive not started to strip the car yet so havent a clue of where the wiring looms run yet.

Tony

Title: Re: Breaking 1997 24V Ultima Estate
Post by lleewar on Aug 30^th, 2010, 12:05pm

No Idea Tony. Just been told that it has it,s own loom by Snoopy. Maybe he could advise. Lee

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Sep 1^st, 2010, 11:47pm

on 08/30/10 at 12:05:24, lleewar wrote:

No Idea Tony. Just been told that it has it,s own loom by Snoopy. Maybe he could advise. Lee

Ill have a look through snoopys post and check the car when i get the interior out

Title: Re: Breaking 1997 24V Ultima Estate
Post by Chieftain on Sep 2^nd, 2010, 7:02pm

Hi is the rad any good i.e. not bulged ;D

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Sep 5^th, 2010, 7:18pm

on 09/02/10 at 19:02:54, Chieftain wrote:

Hi is the rad any good i.e. not bulged ;D

When the bumper is off, I will let you know :)

Title: Re: Breaking 1997 24V Ultima Estate
Post by david1003 on Sep 15^th, 2010, 3:30pm

I'm looking for a rad too. Looks like you could have auction on your hands LOL

Title: Re: Breaking 1997 24V Ultima Estate
Post by Chieftain on Sep 16^th, 2010, 3:44pm

Get in the Q ;D ;D

Title: Re: Breaking 1997 24V Ultima Estate
Post by lleewar on Sep 21^st, 2010, 11:15am

Any luck with the seat loom Tony??

Title: Re: Breaking 1997 24V Ultima Estate
Post by Matt on Oct 3^rd, 2010, 5:37pm

have you got the spare wheel?

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Oct 4^th, 2010, 3:33pm

on 09/02/10 at 19:02:54, Chieftain wrote:

Hi is the rad any good i.e. not bulged ;D

Sorry for the delay in replying.

The radiator is not in the best of condition Im afraid.

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Oct 4^th, 2010, 3:34pm

on 09/21/10 at 11:15:44, lleewar wrote:

Any luck with the seat loom Tony??

Sorry for the delay in replying.

Not had the interior out yet although its deffo electric on the passengers side.

Am off work next week so am aiming to get the car done then.

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Oct 4^th, 2010, 3:35pm

on 10/03/10 at 17:37:42, Matt wrote:

have you got the spare wheel?

Yep, the steel spare is currently on the car and in good order.

Title: Re: Breaking 1997 24V Ultima Estate
Post by Chieftain on Oct 4^th, 2010, 10:28pm

Thanks for the rad reply :(

Title: Re: Breaking 1997 24V Ultima Estate
Post by rich on Oct 6^th, 2010, 12:00am

is the police car you have got a 24v ultima? if it is is it one of the avon somerset force ones ? that would make it one of the same batch as mine.

Title: Re: Breaking 1997 24V Ultima Estate
Post by lleewar on Oct 6^th, 2010, 8:04am

Tony, Finally removed old interior and found that the extra wiring for the passenger seat to go electric is there. Thanks for offering to look next week. Regards Lee

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Oct 6^th, 2010, 4:27pm

on 10/06/10 at 00:00:04, rich wrote:

is the police car you have got a 24v ultima? if it is is it one of the avon somerset force ones ? that would make it one of the same batch as mine.

My Police Car is a 24v Ghia and part of Essex Police's fleet. It was in fact the last Scorpio that Essex Police registered to their fleet in September 1997. Id like tyo see some pictures of your car in service Rich. I did not know that Avon & Somerset had them.
Tony

Title: Re: Breaking 1997 24V Ultima Estate
Post by rew39944 on Oct 13^th, 2010, 8:41pm

tono do you still have the wheel and how much tread is left on them and what size tyres are on them also interested in the rear bumper can you give me some prices .also where abouts are you based

Title: Re: Breaking 1997 24V Ultima Estate
Post by lleewar on Oct 14^th, 2010, 11:16pm

Hi Tony, Check your PM's Lee

Title: Re: Breaking 1997 24V Ultima Estate
Post by jenko_15 on Oct 15^th, 2010, 7:59pm

HI. Do you have the injector wiring loom? If so, what's the condition like and how much? Really desperate - car been off the road for nearly a month now!

Title: Re: Breaking 1997 24V Ultima Estate
Post by jenko_15 on Oct 16^th, 2010, 9:17am

Hi. Would you have the injection loom? If yes - how much please?

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Oct 16^th, 2010, 3:55pm

Where abouts is the injection loom located?

Title: Re: Breaking 1997 24V Ultima Estate
Post by Matt on Oct 16^th, 2010, 6:14pm

Hi Tony

what condition is the sunroof in? mines rotted through on the glass frame work and lets water in ::)

Matt

Title: Re: Breaking 1997 24V Ultima Estate
Post by jenko_15 on Oct 18^th, 2010, 9:18am

HI. Not being an expert myself, I have asked Simmo and he replied "The loom I think you are referring to runs through the V, hence the problems, and should be readily identifiable. It will feed the injectors and other sensors so there will be a number of connection points possibly running down to the gearbox". If you still have it and it's in good condition, could you let me know how much including postage? Cheers.

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Oct 20^th, 2010, 3:53pm

on 10/18/10 at 09:18:11, jenko_15 wrote:

As this part of the loom is part of the engine, Ill be keeping it as Im using the engine in my Police car. Sorry.

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Oct 20^th, 2010, 3:54pm

on 10/16/10 at 18:14:59, Matt wrote:

Hi Tony

what condition is the sunroof in? mines rotted through on the glass frame work and lets water in ::)

Matt

Will check for you later Matt.
Only problem is, the leccy motor has been sold so getting the roof out could be a b****r unless a manual winder can be fitted to slide roof backwards.

Title: Re: Breaking 1997 24V Ultima Estate
Post by magnetono59 on Jan 17^th, 2011, 7:31pm

Do you have the tailgate locking motor.

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Jan 17^th, 2011, 10:58pm

Sorry, the car has now been scrapped.

Title: Re: Breaking 1997 24V Ultima Estate
Post by georgeodyphotos on Dec 18^th, 2011, 6:33pm

Do you have rear shockers (self levelling) ?

Title: Re: Breaking 1997 24V Ultima Estate
Post by Simmo on Dec 18^th, 2011, 9:11pm

If, as I suspect, these are long gone read These two pages (http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=admin;action=display;num=1282569538) where you will see that Sierra ones are a suitable match but NOT self levelling. :)

Title: Re: Breaking 1997 24V Ultima Estate
Post by Tono on Dec 19^th, 2011, 9:20am

The shockers have long gone. There is very little left of the spares I took from the car.

Title: Re: Breaking 1997 24V Ultima Estate
Post by johnk on Feb 6^th, 2014, 8:59am

is towbar available please
thanks john